牌号简介 About |
---|
特点:天然色高分子量分数熔体流动速率冲击嵌段共聚物聚丙烯;抗冲击强度极高;耐化学性能优异。推荐用途:无压管件、薄壁波纹管及异型材挤出加工;化工污水及雨水系统、储罐及管道;地面及生活排水;挤出吹塑容器。 Characteristics: Natural color high molecular weight fractional melt flow rate Impact block copolymer polypropylene; very high impact strength; excellent chemical resistance. Recommended for: Extrusion of non-pressure pipes & fittings, thin-walled corrugated pipes and profiles process; sewage and rainwater systems, tanks and pipes for the chemical industry; ground and domestic drainage; extrusion blow molding containers. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate 2 |
|||
230℃,2.16kg 230℃,2.16kg 2 |
0.30 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 3 |
31.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 3 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 3 |
8.0 | % | ASTM D638 |
弯曲模量 Bending modulus 4 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 4 |
1500 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding |
690 | J/m | ASTM D256-A |
落锤冲击 Drop hammer impact 5 |
|||
-30℃,3.2 mm,注塑成型 -30 ℃, 3.2 mm, injection molding 5 |
J | ASTM D5420 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 程序 B |
3 类型 1, 2.0 in/min |
4 类型 1, 0.051 in/min |
5 Method A |
【新闻资讯】查看全部
消除注塑制品表面缺陷的方法
2020-10-08 搜料网资讯: 注塑制品表面可见的缺陷包括暗斑、光泽差异或者雾化区,以及表面起皱或被称作橘皮。通常这些缺陷发生在浇口附近或者远离浇口区域的尖锐转角后面。从模具和成型工 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |