牌号简介 About |
---|
热塑性注塑机螺杆、筒体、喷嘴和热流道用清洗剂使用方便,消耗低,无反应延迟,应用过程中无异味,经济实惠,适用于NSF注册的热流道系统,符合H2清单要求描述Lusin Clean G 320 I是一种用于热塑性树脂注射成型机的螺杆、筒体、喷嘴和热流道的即用颗粒清洗剂。净化剂由优质热塑性树脂和高效清洁添加剂组成,不含研磨剂。典型性能外观:白色颗粒 SV-17500U is one of a series of easy processing, silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring. This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. Typical Applications Roll covers. Diaphragms. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.23 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
75 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
9.93 | MPa | |
100% 应变 100% strain |
2.93 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
330 | % | |
撕裂强度 tear strength 2 |
kN/m | ||
压缩形变 Compression deformation |
|||
177℃,22 hr 177℃,22 hr |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Cure Agent Cure Agent |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
铝合金模具容易龟裂的缘由剖析及其预防措施
2017-01-03 铝合金模具钢型压铸模具在生产一段时间后会产生龟裂,经过分析认为,产生此现象的原因主要有以下几点: (1)模具温度偏高应力过大 (2)模具模仁material使用8407,skd61 (3)模具热处理硬度过高 (4)定期保养,5k times1 回火,15k times1 回火30k times........ 二、预防压铸模龟裂问题�o提高进口模具钢使用寿命�o要做好以下几点�s 1.压铸模成型 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |