牌号简介 About |
---|
本产品是聚氨酯体系,如果产品在室温下固化,暴露在完全化学和机械影响下仅7天后。应用混凝土浇注模用于水泥浇注模用于陶瓷材料浇注模用于石膏浇注模用于石膏浇注模具有橡胶类特性的塑料原型肖尔A硬度60极低吸水性优异的流动特性良好的抗撕裂扩展性 This product is a Polyurethane system If the product is cured at room temperature exposure to full chemical and mechanical influences only after 7 days. Applications Casting moulds for concrete Casting mould for cement Casting mould for ceramic materials Casting mould for wax Casting mould for gypsum Casting mould for plastic Prototypes with rubber-like properties Properties shore A hardness 60 very low water absorption excellent flow properties good tear propagation resistance |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
吸水率 Water absorption rate 2 |
|||
平衡 balance 2 |
2.4 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
57 到 63 | ISO 7619 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
|||
屈服 yield 3 |
4.70 到 6.30 | MPa | ISO 37 |
拉伸应变 Tensile strain 3 |
|||
断裂 fracture 3 |
1100 到 1400 | % | ISO 37 |
撕裂强度 tear strength |
ISO 34-1 | ||
1.00 mm 1.00 mm 4 |
8.2 到 10 | kN/m | ISO 34-1 |
1.00 mm 1.00 mm 5 |
kN/m | ISO 34-1 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ |
Pa·s | ||
固化时间 Curing time |
|||
20℃ 20℃ |
hr | ||
储存稳定性 storage stability 6 |
|||
20 ℃ 20 ℃ 6 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 35 - 40°C 63 d |
3 类型 2 |
4 Arch shaped test piece without incision |
5 Arch shaped test piece with incision |
6 200 g |
【新闻资讯】查看全部
欧洲同行:“中国机械制造业”影响力及全球市场份额正在逐步提升
2021-09-12 搜料网资讯: 在《中国制造2025》国家行动纲领和十四五规划(2021-2025)引领下,中国的技术优势和全球市场份额有所提升。 近期发布的《转型中的中国市场》中期报告(以下简称报告 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |