牌号简介 About |
---|
警告:此材料的状态为“商业:限量发行”。此材料的数据最近尚未验证。在指定此等级之前,请联系RTP公司以获取当前信息。 Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.39 | g/cm³ | ISO 1183 |
含水量 water content |
0.050 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
41500 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
360 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
1.4 | % | ISO 527-2 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
注塑成型 injection molding |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 2 |
|||
注塑 Injection molding 2 |
kJ/m² | ISO 180-1A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam 2 |
|||
注塑 Injection molding 2 |
kJ/m² | ISO 180/1U | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Primary Additive Primary Additive |
% |
备注 |
---|
2 4mm thickness |
【新闻资讯】查看全部
DS Smith将塑料部门出售给Olympus Partners
2019-03-12 英国包装巨头DSSmith3月6日表示已签订协议,将其塑料部门出售给美国私人股本公司OlympusPartners 。该交易还有待监管部门批准,预计将于今年下半年完成。 据悉,收购价格为5.85亿美元 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |