牌号简介 About |
---|
玻璃纤维增强(30%)聚醚砜,优异的耐化学和电气性能,高刚度,高模量和高密度聚乙烯。 Glass reinforced (30%) Polyether Sulfone, excellent chemical and electrical resistance, high stiffness, modulus and HDT. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.62 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.50 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 2 |
6600 | MPa | ASTM D638 |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
169 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
3.5 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
50 mm跨距 50 mm span 3 |
MPa | ASTM D790 | |
弯曲强度 bending strength 3 |
|||
屈服,50 mm跨度 Yield, 50 mm span 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火,3.2 mm 1.8 MPa, unannealed, 3.2 mm |
℃ | ASTM D648 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
中国TPV市场将达4.3亿美元 汽车仍是次要使用领域
2016-08-23 近日,美国GrandView Research咨询公司发布了一份有关中国热塑性硫化橡胶(TPV)的市场报告。该报告指出,2015年中国的TPV市场规模已超过了1.7亿元美元,未来9年,由于汽车销量的上升对汽车轻量化部件的需求持续增长,中国的TPV市场规模有望在2024年达到约4.3亿元美元。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |