牌号简介 About |
---|
用于汽车电线应用的低密度湿固化聚乙烯化合物。Pexidan® J/T是一种低密度交联聚乙烯(XLPE)体系,可通过水分固化,由硅烷预接枝的碱化合物A-3001和阻燃催化剂母料CAT-012FR组成。按适当比例(60:40)混合和挤压,这两种组分使材料在70-90°C热水或甚至环境湿度下固化。Pexidan® J/T的设计符合SAE J1128标准,适用于GXL、TXL和SXL型绝缘。Pexidan® J/T是符合RoHS的系统。 Low density moisture curable polyethylene compound for SAE J1128 Automotive wire applications. PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ASTM D792 |
交叉结合的程度 The degree of cross combination |
65 | % | ASTM D2765 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
SAE J1128 | ||
断裂 fracture |
15.9 | MPa | SAE J1128 |
断裂 fracture 2 |
15.2 | MPa | SAE J1128 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
300 | % | SAE J1128 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
火焰试验 Flame test |
|||
45 degree Flame Propagation Test 45 degree Flame Propagation Test |
SAE J1128 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
高温伸长率 High temperature elongation 3 |
|||
负荷下伸长率,150℃ Elongation under load, 150 ℃ 3 |
% | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 After thermal ageing (7days @155°C) |
3 15 minutes, 0.2 N/mm² load |
【新闻资讯】查看全部
SABIC携手大型管道制造商联合推出创新管道技术
2021-09-08 搜料网资讯: 荷兰斯塔德, 2021年9月7日 - 今日,全球领先的多元化化工企业沙特基础工业公司(SABIC)宣布推出一款全新技术及专用聚乙烯和聚丙烯树脂产品系列,旨在将聚烯烃压力管道 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |