牌号简介 About |
---|
AMC-8595采用连续单向碳纤维增强。它是为需要高结构强度、轻重量和刚度的部件的压缩成型而设计的。它也可以与其他电子稳定控制系统成型化合物,如AMC-8590共同成型,以在部件的选定区域提供加强。 AMC-8595 is reinforced with continuous, unidirectional carbon fibers. It is designed for compression molding of components requiring high structural strength, light weight, and stiffness. It can also be co-molded with other ESC molding compounds such as AMC-8590 to provide stiffening in selected areas of the component. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.50 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.0 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.11 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
58600 | MPa | ASTM D790 |
弯曲强度 bending strength |
1030 | MPa | ASTM D790 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
贮藏期限 Storage period |
|||
24℃ 24℃ |
wk | ||
后固化时间 Post curing time |
|||
138℃ 138℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
赢创VESTAMID®NRG PA12迎来新契机
2018-12-19 赢创 公司的高性能聚合物业务线赞扬美国运输部管道和危险材料安全管理局(PHMSA)最近关于发布最后规则的决定,该规则修改了联邦管道安全条例,包括使用聚酰胺12( PA12 )热塑性材料塑 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |