牌号简介 About |
---|
EBALTA GH 760/GL是一种双组分环氧树脂,室温固化,可浇铸至40 mm。优良的非研磨填料具有良好的表面滑移性能和机械加工性能。因此,EBALTA GH 760/GL特别适用于金属板工具和铸造设备。由于其高强度和良好的尺寸精度,该系统是相当多用途的。应用铸造模式芯盒板控制铸件夹具锤形工具拉伸成形工具拉伸工具性能尺寸精确耐磨高强度浇注料直到40毫米非常好的滑动性能 ebalta GH 760/GL is a two-components epoxy resin, curing at room temperature, castable to 40 mm. The fine non-grinding fillers lead to good surface slip properties and mechanical workability. For this reason ebalta GH 760/GL is especially suitable for metal sheet tools as well as for foundry equipment. Due to its high strength and excellent dimensional accuracy this system is quite versatile. Applications Foundry patterns Core boxes Boards Control castings jig Hammer form tools Stretch forming tool Stretch tools Properties dimensionally accurate abrasion resistant high strength castable until 40 mm very good sliding properties |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
0.10 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
7.5 到 11 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
2.15 到 2.25 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
8.5 到 11 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
18 到 24 | hr | |
储存稳定性 storage stability 1 |
|||
20 ℃ 20 ℃ 1 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
泰伯耐磨性 Taber abraser |
|||
500 周期,500 g,CS-17 转轮 500 cycles, 500 g, CS-17 wheels |
mg | 内部方法 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:20~50℃ MD:20~50℃ |
1/℃ | DIN 53752 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
塑料机械挤出机过滤网对挤出成型形成影响
2017-09-01 塑料挤出机也属于塑料机械的种类之一。挤出机依据机头料流方向以及螺杆中心线的夹角,可以将机头分成直角机头和斜角机头等。在挤出机的挤出过程中,熔融物料通过过滤网被输送给模具。过滤网使物料得到过滤,并能改进物料的混合效果。但是,过滤网也能使工艺过程产生波动,导致背压和熔融物料温度上升,有时还会减少。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |