牌号简介 About |
---|
聚喷气橡胶类材料包括Tangogray、Tangollock、Tangoplus和Tangollockplus。它们提供了不同等级的弹性体特性:肖氏硬度A、断裂延伸率、抗撕裂性和拉伸强度,使其适用于消费类电子产品、医疗设备和汽车内饰的防滑或软表面。理想用途:橡胶环绕物和二次成型软接触涂层和防滑表面、旋钮、握把、拉手、把手、垫圈、密封件、软管和鞋类展示和通信模型 PolyJet rubber-like materials include TangoGray™, TangoBlack™, TangoPlus™ and TangoBlackPlus™. They offer various levels of elastomer characteristics: Shore scale A hardness, elongation at break, tear resistance and tensile strength that make it suitable for non-slip or soft surfaces on consumer electronics, medical devices and automotive interiors. Ideal for: Rubber surrounds and overmolding Soft-touch coatings and nonslip surfaces Knobs, grips, pulls, handles, gaskets, seals, hoses and footwear Exhibition and communication models |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 到 1.13 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
26 到 28 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
0.800 到 1.50 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
170 到 220 | % | ASTM D412 |
撕裂强度 tear strength |
1.96 到 3.92 | kN/m | ASTM D624 |
压缩形变 Compression deformation |
% | ASTM D395 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中国文联十一次、中国作协十次全国代表大会召开
2021-12-18 搜料网资讯: 12月14日上午,中国文学艺术界联合会第十一次全国代表大会、中国作家协会第十次全国代表大会在北京人民大会堂隆重举行。中共中央总书记、国家主席、中央军委主席习 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |