牌号简介 About |
---|
是热塑性弹性体(TPE-S)的商业名称,基于SBS,SEBS(苯乙烯-丁二烯-苯乙烯;苯乙烯-乙烯-丁二烯-苯乙烯)嵌段共聚物,通过混合SBS,SEBS,…含聚烯烃的弹性体,如PP、PE、EVA等对酸、碱和所有水溶液的耐受性都很好。对酒精和乙二醇的抗性中等。对芳香烃、脂肪和油的抵抗力很差。向上抵抗圆系列松弛增加。所有的“Solplasts”都有很好的体积电阻:超过1012欧姆厘米。在聚烯烃基(PE、PP、EVA)上使用上色母料。以SEBS嵌段共聚物为基础的9000系列工业化合物,具有不同的物理特性和光学特性。工作温度介于-50°C和80°C之间,很快就达到110°C。由于其饱和的化学结构对产品的广谱非常有用,因此需要对光和天气影响具有高稳定性。它可以很好地取代聚氯乙烯,硫化橡胶或TPE-V,在上述领域的使用。9000A注射成型产品,一般外用和内用。 Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. Resistace round series upwards loosely increases. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 9000 Technical compaund on SEBS block copolymers base; Different phisical characteristics and optics considering purpose of use. Work temperature between -50°C and 80°C, very shortly up to 110°C. Due to their saturated chemical structure are very useful for wide spectrum of products, where high stability to the light and weather impact is requireing. It can replace PVC, vulcanised rubber or TPE-V very well, in mentioned field of use. 9000A Injection moulded product of the general usage for external and internal use. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 到 1.16 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
10 到 20 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 到 85 | ISO 868 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩形变 Compression deformation |
|||
72℃,23 hr 72℃,23 hr |
30 到 40 | % | ISO 815 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |