牌号简介 About |
---|
20%玻璃纤维比例的醚基注射成型型,具有很高的刚度、极强的冲击强度和低温下的流动性、很好的水解和微生物抗性、耐海水、良好的抗紫外线、高抗冲击性和高柔韧性、良好的吸音性能、优异的着色性和可打印性。质量应用:机械高应力部件的技术应用(室内和室外),滑雪保护器,骑马和汽车运动,渔网坠,头盔,冬季运动产品,如滑雪提示,滑雪边缘保护零件,滑雪捆绑,滑雪靴,护目镜,近海地区的住房。 Ether-based injection molding type with a ratio of 20% glass fiber Characteristics: very high stiffness, extreme impact strength and fl exibility at low temperature, very good hydrolysis and microbial resistance, seawater proof, good UV resistance, high shock resistance & high flexibility, good noise absorption, excellent colorability and printability Applications: mechanically highly stressed components of technical applications (indoor and outdoor), protectors for skiing, horse riding and motor sports, fishing net sinker, helmets, winter sport products such as ski tips, ski edge protection parts, ski bindings, ski boots, goggles, housings in the offshore area |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.30 | g/cm³ | ISO 1183/A |
收缩率 Shrinkage rate |
|||
TD TD |
0.51 | % | |
MD MD |
0.12 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
20 | kJ/m² | ISO 179/1eA |
23℃ 23℃ |
40 | kJ/m² | ISO 179/1eA |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-30℃ -30℃ |
ISO 179/1eU | ||
23℃ 23℃ |
ISO 179/1eU | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
DIN 53752 | ||
MD MD |
1/℃ | DIN 53752 | |
TD TD |
1/℃ | DIN 53752 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
拉伸强度 tensile strength |
MPa | ISO 527-2/200 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/200 | |
弯曲模量 Bending modulus 2 |
ISO 178 | ||
-30℃ -30℃ |
MPa | ISO 178 | |
23℃ 23℃ |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
ISO 178 | ||
-30℃ -30℃ |
MPa | ISO 178 | |
23℃ 23℃ |
MPa | ISO 178 | |
Abrasion Abrasion |
mm³ | ISO 4649 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.039 in/min |
3 0.079 in/min |
【新闻资讯】查看全部
美国领衔乙烯产能扩张潮 全球聚烯烃现过剩隐忧
2017-12-13 美国和世界其他地区大量建设的PE产能将超过需求增长,可能需数年时间消化才能使市场供需平衡。美国页岩气革命以及其他地区的项目将会给全球带来2500万吨/年左右的新增乙烯产能,在全球聚烯烃市场掀起一场“大战”。 页岩气催生乙烯建设潮 仅美国就将增加大量PE新产能,至2019年美国将新建9套乙烯裂解装置,新增乙烯生产能力920万吨/年,现有乙烯装置扩能改造还将再增加乙烯产能110万吨/年,两方面总计占到美国乙烯产能的34%。 到2019年,美国将新 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |