牌号简介 About |
---|
Lim6010液体硅橡胶是一种双组分产品,用于液体注射成型,生产弹性体零件,其中低硬度是关键要求。LIM6010弹性体是透明的,但很容易用母粒颜色着色。低硬度和非粘性的结合使得该产品可以用于诸如玉米垫和鞋跟嵌入物等消费品应用,在这些应用中,“软接触”的感官特性非常重要。LIM6010弹性体提供了一个方便的1:1的配合比,并容易从模具释放。固化时间很快,通常在150°C(302°F)-204°C(400°F)下固化10到40秒,这取决于零件尺寸、配置和成型温度。主要特点和优点低硬度非粘性感官特性(增加缓冲)快速成型周期时间->20-60秒方便1:1混合比突出的热循环性能潜在应用低硬度和非粘性的结合允许该产品用于此类消费品应用,以及这里“软触摸”的感觉特征很重要。玉米垫跟嵌件 LIM6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature. Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential Applications The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts |
技术参数 Technical Data | |||
---|---|---|---|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
HB | UL 94 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
部件 A Component A |
按重量计算的混合比: 1.0 | ||
部件 B Component B |
按重量计算的混合比: 1.0 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Clear/Transparent | ||
-- -- 3 |
Clear/Transparent | ||
密度 Density |
|||
-- -- 2 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
|||
-- -- 2 |
Pa·s | ||
-- -- 3 |
Pa·s | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A 4 |
|||
邵氏 A Shaw's A 5 |
|||
拉伸模量 Tensile modulus |
|||
100% 正割 100% secant 4 |
MPa | ||
100% 正割 100% secant 5 |
MPa | ||
拉伸强度 tensile strength |
|||
-- -- 4 |
MPa | ||
-- -- 5 |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture 5 |
% | ||
断裂 fracture 4 |
% | ||
撕裂强度 tear strength |
|||
Die B Die B 4 |
kN/m | ||
Die B Die B 5 |
kN/m |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
4 As Molded 30 sec @ 177°C (350°F) |
5 Postbaked 1 hr @ 177°C (350°F) |
【新闻资讯】查看全部
EREMA演示TVEplus回收技术
2016-04-26 EREMA公司在现场展示其INTAREMA 1007 TVEplus回收系统以及EREMA SW4/104 RTF熔体泵。 EREMA演示TVEplus回收技术 < |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |