牌号简介 About |
---|
V74C是一种氟弹性体(FKM)材料,开发用于提供极低的压缩永久变形,并具有良好的热老化性能。V74C被设计成即使在极端温度循环下也能保持比传统FKM等级更长的机械性能,从而延长使用寿命并显著降低拥有成本。V74C具有良好的耐酸性和水性介质,以及在高温下对油、燃料和液压油的优异的耐性。可提供任何尺寸的O型环(完全成型,内径可达2米/6.5英尺)和定制设计的组件。关键特性:极低的压缩永久变形和累积压缩永久变形,延长了密封寿命;优异的长期高温稳定性;优异的热老化性能,适用于长期密封;典型应用:真空泵和压缩机(高温应用);机械密封;化学泵和阀门;快速接头连接器 V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat ageing properties. V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership. V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature. Available in any sized O-ring (fully moulded up to 2m/6.5ft internal diameter) and custom designed components. Key Attributes Extremely low compression set and cumulative compression set providing extended seal life Excellent long-term high temperature stability Superior heat ageing properties for long-term sealing Typical Applications Vacuum pumps & compressors (high temperature applications) Mechanical seals Chemical pumps and valves Couplings and quick connectors |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
IRHD 硬度 IRHD hardness |
75 | ASTM D1415 , ISO 48 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
12.5 | MPa | ASTM D412 , ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
220 | % | ASTM D412,ISO 37 |
压缩形变 Compression deformation |
ASTM D395 , ISO 815 | ||
200℃,24 hr 200℃,24 hr |
5.0 | % | ASTM D395,ISO 815 |
200℃,72 hr 200℃,72 hr |
9.5 | % | ASTM D395,ISO 815 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
250℃,72 hr 250℃,72 hr |
% | ASTM D412 , ISO 37 | |
空气中极限伸长率的变化率 The rate of change in ultimate elongation in air |
|||
250℃,72 hr 250℃,72 hr |
% | ASTM D412 , ISO 37 | |
空气中 IRHD 硬度的变化率 The change rate of IRHD hardness in the air |
|||
250℃,72 hr 250℃,72 hr |
ASTM D573 , ISO 188 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
最高工作温度 Maximum operating temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
利安德巴赛尔开建华北第一座工厂
2016-06-14 利安德巴赛尔集团在中国北方的第一座工厂 -- -- 大连巴赛尔聚烯烃工程塑料项目 -- -- 已经动工建设。 该聚烯烃工程塑料项目占地面积近4.3万平方米,总投资3亿元人民币,一期投资2500万美元。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |