牌号简介 About |
---|
高强度可毛巾状粘合胶,用于将瓷砖粘合到垂直、弯曲和架空表面,并修复瓷砖表面。预期用途:将陶瓷TLE粘合到垂直、弯曲和顶部表面。产品特点:无下垂粘合剂,每平方英尺可支撑4磅,固化时,填充破碎机中的间隙和接缝,然后浇注背衬化合物,与金属、陶瓷和混凝土具有良好的粘合性,易于使用1:1配方。 High-strength towelable adhesive compound designed for bonding ceramic tile to vertical, curved and overhead surfaces and repariing ceramic tile surfaces. Intended Use: Bonding ceramic tle to vertical, curved and overhead surfaces. Product Features: Non-sagging adhesive that will support 4 lbs. per square foot while curing Fills gaps and joints in crushers prior to pouring backing compounds Excellent adhesion to metal, ceramic and concrete Easy to use 1:1 formula |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
特定体积 Specific volume |
0.686 | cm³/g | |
密度 Density 2 |
1.40 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 | % | ASTM D2566 |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
13 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐热温度 Heat resistant temperature |
℃ | ||
拉伸剪切强度 Tensile shear strength |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cured |
【新闻资讯】查看全部
中国研制出可在海水中降解的聚酯复合塑料资料
2018-09-27 中国科学家最近研制出一种可在海水中降解的聚酯复合塑料材料,有望在诸多领域替代现有难以降解的通用塑料。 中国科学院理化技术研究所高级工程师王格侠介绍,其团 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |