牌号简介 About |
---|
10-3012是一种高强度、快速固化的环氧粘合剂。这种环氧粘合剂和灌封化合物是专门为高清晰度,良好的冲击强度和耐水性而配制的。应用:这种优秀的粘合剂非常适合各种珠宝、工业、结构和电气应用。这种粘合剂是现场维修的最佳选择。特点:粘结强度高,耐水、耐化学性好,冲击强度好,方便1:1配合比,室温固化,填补空隙,快速凝固。 10-3012 is a high strength, fast setting epoxy adhesive. This epoxy adhesive and potting compound is specially formulated for high clarity, good impact strength and water resistance. Applications: This outstanding adhesive is ideally suited for a wide range of jewelry, industrial, structural and electrical applications. This adhesive is an excellent choice for field repairs. Features: High bond strength Water and chemical resistant Good impact strength Convenient 1:1 mix ratio Room temperature cure Fills gaps and voids Fast setting |
技术参数 Technical Data | |||
---|---|---|---|
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
-40.0 到 250 | ℃ | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
Clear/Transparent | ||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
1.0 | ||
Part B Part B |
1.0 | ||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Part A Part A |
1.0 | ||
Part B Part B |
|||
密度 Density |
|||
25℃ 25℃ |
g/cm³ | ||
固化时间 Curing time |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
耐电强度 Electrical strength |
kV/mm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
炼油向化工转型又下一城,洛阳石化拟建百万吨乙烯项目
2021-08-06 搜料网资讯: 面对我国炼油产能严重过剩的局势,炼油向烯烃、芳烃等基本化工原料转型已成为行业主流趋势。近日,洛阳石化传出消息,拟建百万吨乙烯项目。 8月2日,从中石化洛阳 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |