牌号简介 About |
---|
Smooth-On PC-3®实验室台面水泥是一种双组分黑色环氧树脂化合物,设计用于连接、粘合和填缝实验室台面和台面部分。这种环氧树脂水泥填充很重,可以粘附在垂直表面上而不会下垂。它在室温下固化,收缩率极低。PC-3不含挥发性有机化合物(VOC)或溶剂。它具有化学稳定性,与天然和人造石材、大多数金属、玻璃、木材以及聚酯、酚醛和环氧等热固树脂紧密结合。PC-3以品脱(2.5磅)或夸脱(5.0磅)为单位提供,仅以包装箱数量出售。一箱品脱含有六个单位,一箱夸脱含有三个单位。 Smooth-On PC-3® Laboratory Table Top Cement is a two-component, black epoxy resin compound designed to join, bond and caulk sections of laboratory counters and tables. This epoxy resin cement is heavily filled and will adhere to vertical surfaces without sagging. It cures at room temperature with extremely low shrinkage. PC-3® contains no volatile organic compounds (VOC's) or solvents. It is chemically stable and bonds strongly to natural and artificial stones, most metals, glass, wood and to thermosetting resins such as polyester, phenolic and epoxy. PC-3® is available in pint units (2.5 lbs.) or quart units (5.0 lbs.) and is sold in case quantities only. A case of pints contains six units and a case of quarts contains 3 units. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 | g/cm³ | ASTM D792 |
特定体积 Specific volume |
0.723 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 | % | |
粘度 viscosity |
Paste | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Handle Time Handle Time 3 |
2.0 | hr | |
混合比 Mixing ratio |
|||
拉伸剪切强度 Tensile shear strength |
|||
to CR Steel to CR Steel |
MPa | ASTM D1002 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness 2 |
ASTM D2583 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 After 24 hrs |
3 0.010 in/0.0254 cm film |
【新闻资讯】查看全部
再募资8.5亿元 会通股份拟推进募投项目战略性落地
2021-06-20 搜料网资讯: 6月9日,会通股份发布公告称,公司拟向不特定对象发行可转换公司债券,募资总额不超85,000万元,募资总额扣除发行费用后用于 年产30万吨高性能复合材料项目和补充流 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |