牌号简介 About |
---|
卫生垫圈由Fluoraz 799制成,在SIP和CIP系统中的性能水平超过了所有其他弹性体。虽然三元乙丙橡胶和氟橡胶可以长时间提供密封,但物理性能的变化除了简单的体积膨胀外,还可能产生不利影响。硬度降低或模量降低表示抗压强度降低。如果卫生垫圈按照安装规范重新密封,垫圈将被压缩到比预期水平更高的水平,从而增加对项目流的侵入。硬度/模量增加和延伸率下降意味着脆化。密封件会出现扭矩不足,导致泄漏或开裂。 Sanitary gaskets made from Fluoraz® 799 proivde a level of performance in SIP and CIP systems that surpasses all other elastomers. While EPDMs and FKMs can provide a seal for extended periods, chnages in physical properties can have adverse effects beyond simple volume swell. A decrease in hardness or drop in modulus signals a reduction in compressive strength. If a sanitary gasket is retorqued to the installation specifications, the gasket will be compressed at a greater level than desired, resulting in increased intrusion into the proecess stream. An increased in hardness/modulus and a drop in elongation means embrittlement. The seal will be undertorques, resulting in either leaks or cracking. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.65 | g/cm³ | ASTM D297 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
90 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
20.7 | MPa | ASTM D412 |
100% 应变 100% strain |
18.1 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
120 | % | ASTM D412 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
使用温度 Operating temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
TR 10/50 TR 10/50 |
℃ | ASTM D1329 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
塑胶行业不是一切的展会都叫“塑料展”
2015-12-15 中国郑州塑料产业博览会凭借塑料产业的发展趋势及团队的拼搏努力,经过3年的沉淀和发展,获得来自各政府、商会、参展商、参观商交口称赞,目前已成为国内成长速度最快,中西部最专业、唯一有影响力的塑料盛会。 2016中国郑州塑料产业博览会简称“2016SINO-PLAS”将于2016年3月11日-13日移师郑东新区、郑州国际会展中心隆重召开。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |