![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
Poyo Putty 40是一种双组分制模硅酮(Tin Catalyst),可以“现场”混合和应用,几乎可以直接应用于任何型号。Poyo Putty可以容纳任何垂直表面,甚至捕捉到最精细的细节——非常适合制作几分钟内即可使用的坚固橡胶模具。少用-多用:因为薄涂薄型,材料少用,省钱。模具也很轻,便于操作。使用寿命和固化时间可以通过改变B部分催化剂的用量来调整(更快或更慢)。用户友好-Poyo腻子可以测量和混合体积(无需比例)。它将坚持自己和其他硅橡胶,给用户许多应用选择或作为硅橡胶修补材料使用。poyo putty用于制作珍贵古董和考古模型的模具,也可用于制作雕塑、原型、蜡烛、画框、硬币等快速模具。您可以将蜡、石膏和各种树脂浇铸到poyo putty模具中。 PoYo® Putty 40 is a two-component mold making silicones (tin catalyst) that can be mixed and applied "on site" - directly to almost any model. PoYo® Putty will hold any vertical surface and capture even the finest detail - perfect for making strong rubber molds that can be used within minutes. Use Less - Do More: Because PoYo® is applied as a thin layer, less material is used, saving you money. Molds are also lightweight, making them easier to handle. Pot life and cure time can be adjusted (faster or slower) by varying the amount of Part B catalyst. User Friendly - PoYo® Putty can be measured and mixed by volume (no scale necessary). It will stick to itself and other silicone rubbers, giving the user many application options or for using as a silicone rubber repair material. PoYo® Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. You can cast wax, gypsum and a variety of resins into PoYo® Putty molds. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.30 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.770 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
40 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
3.10 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
|||
23℃ 23℃ |
min | ASTM D2471 | |
脱模时间 stripping time |
|||
23℃ 23℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
|||
工作温度 working temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部 ![]()
欧盟研制出静态密封圈一次性成型工艺
2016-12-01 近日,欧盟第七研发框架计划(FP7)资助组成欧洲TDM-SEALS研发团队,成功研制出动态密封圈一次性成型工艺。 制造动态密封圈属于欧盟出口型高增长高附加值行业 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |