牌号简介 About |
---|
SEALUTION™ 230 Peel Polymer是一种高清晰度的可剥离密封剂,它为聚丙烯和聚乙烯本身提供可剥离密封。适用于铸膜生产线。主要特点:颗粒状可剥离密封剂本身,PP和PE良好的光学性能符合:欧盟,2011年10月美国食品和药物管理局咨询条例的完整细节。 SEALUTION™ 230 Peel Polymer is a high clarity peelable sealant that gives a peelable seal to itself, polypropylene and polyethylene. It is suitable for use in cast film lines. Main Characteristics: Pellet form Peelable sealant to itself, PP and PE Good optics Complies with: EU, No 10/2011 U.S. FDA Consult the regulations for complete details. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.897 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
3.3 | g/10min | ASTM D1238 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness |
|||
测试 test |
51 | µm | |
始封温度 Initial sealing temperature 2 |
|||
51 µm,吹塑薄膜 51 µ m, blow molded film 2 |
95.0 | ℃ | 内部方法 |
可剥离范围 Strippable range 3 |
95 到 180 | ℃ | 内部方法 |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
雾度 Haze 4 |
|||
50 µm,吹塑薄膜 50 µ m, blow molded film 4 |
% | ISO 14782 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Temperatures at which 2 N/15 mm heat seal strength is achieved. Heat Seal Strengths, Topwave HT Tester 0.5 s dwell, 500 N pressure, pull speed 100 mm/min. |
3 Peelable range of 3-5 N/15 mm. for this particular structure, seal to itself. Heat Seal Strengths, Topwave HT Tester 0.5 s dwell time, 500 N pressure, pull speed 100 mm/min. |
4 Haze for this particular structure |
【新闻资讯】查看全部
盛禧奥取得医疗塑料研发作产ISO 13485认证
2017-01-23 盛禧奥(Trinseo)高性能塑料/消费者市场业务部宣布获得ISO 13485认证――医疗设备设计制造质量管理系统要求的国际标准。 盛禧奥获得医疗塑料开发制造ISO 13485认证< |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |