牌号简介 About |
---|
FRAGOM:是我们的阻燃无卤聚烯烃热塑性化合物的商标。FRAGOM PR/399:具有高温指数和良好氧指数的阻燃聚烯烃热塑性化合物,适用于电缆护套和绝缘。认证:CEI2011 M1、VDE0207 HM2 FRAGOM : is the trademark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/399: flame retardant polyolefine thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. Certify : CEI2011 M1,VDE0207 HM2 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.52 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
150℃,21.6kg 150℃,21.6kg |
7.0 到 10 | g/10min | ASTM D1238 |
吸水率 Water absorption rate |
|||
100℃,24hr 100℃,24hr |
12.0 | g/m² | IEC 60811 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
100℃,168 hr 100℃,168 hr |
8.0 | % | IEC 60811 |
在空气中断裂时拉伸应力变化 Changes in tensile stress during fracture in air |
|||
100℃,168 hr 100℃,168 hr |
-12 | % | IEC 60811 |
拉伸强度的变化率 The rate of change in tensile strength |
|||
断裂时拉伸应力变化 Changes in tensile stress during fracture |
|||
70℃,4 hr,在SAE 20油中 70 ℃, 4 hours, in SAE 20 oil |
% | IEC 60811 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热压试验 Hot press test |
|||
4h at 80℃ Penetratrion 4h at 80℃ Penetratrion |
% | IEC 60811 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
Halogen Content Halogen Content |
% | IEC 60754-1 | |
温度指数 Temperature index 2 |
|||
燃烧 burning 2 |
℃ | NES 715 | |
烟气中的腐蚀性气体 Corrosive gases in flue gas |
|||
pH pH |
IEC 60754-2 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | IEC 60811 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | IEC 60811 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 21% O2 |
【新闻资讯】查看全部
Formlabs 发布免费的3D打印和注塑成型白皮书
2017-10-10 3D打印虽然不一定会取代注塑成型,但却能改进它,就像Formlabs研究人员在一份名为“用3D打印模子进行注塑成型”的白皮书中所描述的那样。 用于注塑的模具通常昂贵且耗时,用3D打印来小批量生产这些模具可以节省时间和金强。研究中,研究人员用一台Form 2 3D打印机为几个小零件打印了模具,然后用一台Galomb Model-B100注塑机将零件制造出来。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |