牌号简介 About |
---|
STYCAST® 3050 Catalyst 9设计用于封装和封装应用,零件之间的物理间距非常小。填充系统不具有研磨性,易于加工。这是使用分配设备或需要后续加工固化零件时的考虑因素。Stycast3050可用于多种催化剂。有关与其他可用催化剂一起使用时混合性能的更多信息,请联系当地技术服务代表以获取帮助和建议。产品优点极低粘度,能很好地渗透到紧密包装的组件中,良好的机械加工性,通用室温固化,良好的耐化学性,良好的物理强度。 STYCAST 3050 Catalyst 9 is designed for potting and encapsulation applications with very small physical spacing between parts. The filler system is non-abrasive and readily machinable. This is a consideration when using a dispensing equipment or where subsequent machining of the cured part is required. STYCAST 3050 can be used with a variety of catalysts. For more information on mixed properties when used with other available catalysts, please contact your local technical service representative for assistance and recommendations. Product Benefits Very low viscosity Excellent penetration into tightly packed assemblies Good machinability General purpose Room temperature cure Good chemical resistance Good physical strength |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 | % | ASTM D2566 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
54.0 | MPa | ASTM D412 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
0.40 | W/m/K | ASTM D2214 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
5.0E+15 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
16 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Hardener Hardener |
|||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Resin Resin |
|||
Hardener Hardener |
|||
密度 Density |
|||
-- -- 2 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
|||
-- -- 4 |
Pa·s | ||
-- -- 2 |
Pa·s | ||
-- -- 3 |
Pa·s | ||
固化时间 Curing time |
|||
65℃ 65℃ |
hr | ||
45℃ 45℃ |
hr | ||
25℃ 25℃ |
hr | ||
储存稳定性 storage stability 5 |
|||
25 ℃ 25 ℃ 5 |
min | ||
贮藏期限 Storage period |
|||
25℃ 25℃ |
month | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 |
备注 |
---|
2、Mixed |
3、Part A |
4、Part B |
5、100 g mass |
【新闻资讯】查看全部
大连商品交易所22日PP行情表
2021-11-22 搜料网资讯: 大连商品交易所 日行情表 查询日期: 20 21 年 11 月 22 日 本月第 16 个交易日 本年第 214 个交易日 商品 交割月份 开盘价 最高价 最低价 收盘价 前结算价 结算价 涨跌 涨跌 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |