牌号简介 About |
---|
InnoPlus HD8000F是高密度聚乙烯薄膜级,具有高分子量和广泛的分子量分布。这一等级显示出优良的机械强度,即使是低规格,非常高的冲击强度,良好的刚度和良好的热密封性。InnoPlus HD8000F适用于宽膜和重负荷应用。典型应用:衬膜、工业薄膜、垃圾袋、塑料板和桌布 InnoPlus HD8000F is high density polyethylene film grade which has high molecular weight and possesses broad molecular weight distribution. This grade exhibits excellent mechanical strength even low gauges, very high impact strength, good stiffness and good heat sealability. InnoPlus HD8000F is suitable for wide film and heavy duty applications. Typical Application: Liner films, Industrial films, Garbage bags, Plastic Sheets and Table clothes |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.950 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.030 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
25%非离子表面活性剂,F50 25% non-ionic surfactant, F50 |
> 1000 | hr | ASTM D1693B |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 2 |
510 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
123 | ℃ | ASTM D1525 3 |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ||
断裂 fracture |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D747 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
2、Non Break |
3、速率 A (50°C/h), 压 力1 (10N) |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |