牌号简介 About |
---|
SAXAMID™ 126H是一种通用尼龙6注塑级。优点是周期短,释放性能好。此外,热稳定剂的含量更高,在更高的环境温度下使用更为理想。 SAXAMID 126H is a general purpose polyamide 6 injection-molding-grade. Benefits are short cycle times and good release properties. Additionally this has a higher content of heat stabilizer which is preferred used at higher ambient temperatures. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
9.5 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
3.0 | % | |
粘数(H2SO4(硫酸)) Viscosity (H2SO4 (sulfuric acid)) |
150 | cm³/g | ISO 307 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
2800 | MPa | ISO 527-1-2 |
拉伸强度 tensile strength |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
弯曲强度 bending strength 2 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
-30℃ -30℃ |
|||
23℃ 23℃ |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 3 |
|||
1.8 MPa,未退火,64 mm跨距 1.8 MPa, unannealed, 64 mm span 3 |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B120 B120 |
℃ | ISO 306/B120 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
灼热丝可燃性指数 Glowing wire flammability index |
|||
1.0 mm 1.0 mm |
℃ | IEC 60695-2-12 |
备注 |
---|
2、2.0 mm/min |
3、80*10*4 mm |
【新闻资讯】查看全部
国际油价回落但国内油价为何上涨:看调价前十个工作日国际油价平均
2022-03-18 国家发展改革委17日称,根据近期国际市场油价变化情况,按照现行成品油价格形成机制,自2022年3月17日24时起,国内汽油、柴油价格每吨分别提高750元和720元。 这是去年年底以来我国 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |