牌号简介 About |
---|
R01C-00是一种低流速、高清晰度、抗静电的聚丙烯无规共聚物,专为挤出、热成型和吹塑应用而设计。这一等级得益于良好的透明性、高的房间和冰箱耐温度冲击性和良好的加工性能。该材料经美国保险商实验室认可,可在65°C下持续使用,并符合21 CFR 177.1520中规定的美国食品药品监督管理局的要求。 R01C-00 is a low flow rate, high clarity, and antistatic polypropylene random copolymer designed for extrusion, thermoforming and blow molding applications. This grade benefits from excellent see-through clarity, high room and refrigerator-temperature impact resistance, and good processability. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
2.0 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,23 ℃ Yield, 23 ℃ |
28.6 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
|||
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
1000 | MPa | ASTM D790 |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
雾 度 1270 μm Haze 1270 μ M |
11 | % | ASTM D1003 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
72.2 | ℃ | ASTM D648 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50mm 1.50mm |
UL-94 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 23°C |
【新闻资讯】查看全部
英力士将建聚苯乙烯回收试点工厂
2021-12-12 搜料网资讯: 近日,英力士宣布,将投资建设聚苯乙烯高级回收试点工厂。该站点将与英国斯温顿的Recycling Technologies合作建立,预计于2022年下半年投运。 该试点工厂使用的解聚技术, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |