牌号简介 About |
---|
InnoPlus HD3355F由三井公司授权的泥浆工艺生产。该牌号具有良好的光学性能、力学性能和加工性能的平衡性。该牌号的特点是凝胶含量低,硬度和包装性能好。该等级适用于共挤工艺生产的高品质薄膜。典型用途:复合膜、复合管、包装用通用膜。 InnoPlus HD3355F is produced by slurry process, a technology licensed by Mitsui. This grade has well balance property of optical property, mechanical property and processability. The special characteristic of this grade consists of low gel content, stiffness and packing property. This grade is suitable for high quality film, produced by co-extrusion process. Typical Application : Laminated film, Laminated Tube, General purpose film for packaging. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.951 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
1.1 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
140 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
122 | ℃ | ASTM D1525 2 |
熔融峰值温度 Melting peak temperature |
131 | ℃ | ASTM D3418 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ||
断裂 fracture |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D747 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
2、速率 A (50°C/h), 压 力1 (10N) |
【新闻资讯】查看全部
Nouryon将瑞典的表面活性剂产能提高一倍
2019-09-02 Nouryon将扩大位于瑞典Stenungsund的表面活性剂工厂的产能,以支持几种现有产品的增长,以及包括石油和天然气,润滑油和燃料以及沥青在内的市场的新型可持续技术。耗资1200万欧元的扩 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |