牌号简介 About |
---|
DW232P是一种低密度多孔聚四氟乙烯薄膜产品。它具有聚四氟乙烯的固有优点:优异的耐化学性、抗压性、收缩率降低、尺寸稳定性、温度范围为-400至+500 F、摩擦系数低、可用厚度范围为0.010“至0.100”。DW232P适用于盛装液体的气体排放、油水分离应用、密封和耐热/耐化学性过滤器。 DW 232P is a low density, porous PTFE film product. It has the inherent benefits of PTFE: exceptional chemical resistance, crush resistance, reduced shrinkage, dimensional stability, temperature range from -400 to +500 F, low coefficient of friction and an available thickness range of 0.010" to 0.100". DW 232P are ideal for use in venting of gasses while holding liquids, oil - water separation applications, gasketing and filters for heat/chemical resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Thickness Thickness |
254.0 到 508.0 | µm | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,屈服,250 µm MD, yield, 250 µ m |
1.38 | MPa | ASTM D882 |
MD,屈服,510 µm MD, yield, 510 µ m |
2.07 | MPa | ASTM D882 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Air Flow Air Flow 2 |
|||
254.0 µm 254.0 µm |
2.0 | sec | |
508.0 µm 508.0 µm |
5.0 | sec | |
Core ID Core ID |
mm | ||
Core Type Core Type |
|||
Width Width 3 |
mm | ||
孔隙度 porosity |
vol% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Gurley Densometer (100cc/1sq in/20oz) |
3 Product Dependent |
【新闻资讯】查看全部
令人惊叹的全幅显示屏将于2024年出现在汽车仪表板上
2021-08-11 搜料网资讯: 德国大陆集团宣布传统的离散式仪表板正在消亡,包括人们熟悉的速度表、转速表和燃油表。取而代之的是,该公司正在努力寻找能够提供所有这些信息的显示屏,以取代 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |