牌号简介 About |
---|
NYCOA 2237是尼龙共聚物树脂,具有良好的透明性和阻隔性能。该树脂是专为厚度达5毫米的透明应用而开发的,同时保留了其性能和耐化学性。NYCOA 2237是专门设计的,以提供易于加工的性能。它可以在传统的挤压和注射设备上进行加工,设计用于加工标准级尼龙。NYCOA 2237可提供定制的添加剂包装:热稳定剂和/或紫外线稳定剂。典型的注塑应用包括观察镜、化学防溅护目镜、时尚眼镜架、高压开关外壳、过滤器外壳、泵外壳、流量计、液位指示器和气体过滤碗。典型的挤压应用包括高端透明钓鱼线、管子、透明板和运动和汽车用装饰膜。 NYCOA 2237 is Nylon copolymer resin that exhibits excellent transparency and good barrier properties. The resin was developed especially for applications requiring transparency in thickness up to 5 mm, while retaining the properties and chemical resistanc NYCOA 2237 has been specifically designed to offer easy processability. It can be processed on conventional extrusion and injection equipment designed to process standard grades of nylon. NYCOA 2237 is available with custom additive packages: heat stabilizer and/or UV stabilizer. Typical injection molding applications include sight glasses, chemical splash goggles, fashion eyeglass frame, high-voltage switch casings, filter housings, pump casings, flow meters, liquid-level indicators, and filter bowls for gas. Typical extrusion applications include high-end transparent fishing lines, tubing, transparent sheets, and decorative films for sports and automotive applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
1.0 | % | ASTM D955 |
TD TD |
1.2 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
1.7 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
6.4mm 6.4mm |
69 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 2 |
MPa | ASTM D790 | |
弯曲强度 bending strength 2 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
使用量最大的填料碳酸钙该怎么用?
2021-06-24 搜料网资讯: 碳酸钙作为无机填料应用于塑料填充已有多年的历史。过去碳酸钙一般作为填料以降低成本为主要目的,并收到较好效果。近年来,随着生产上广泛的使用和大量的研究发现 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |