牌号简介 About |
---|
PBT,30%玻璃纤维,注塑,提高激光透明度,提高焊接性,水解稳定,近红外激光透明着色(黑色) POCAN® B3235HRLT 904040 PBT, 30 % glass fibers, injection molding, improved laser-transparency, improved weldability, hydrolysis stabilized, NIR-laser transparent coloring (black) POCAN® B3235HRLT 904040 PBT, 30 % glass fibers, injection molding, improved laser-transparency, improved weldability, hydrolysis stabilized, NIR-laser transparent coloring (black) POCAN® B3235HRLT 904040 PBT, 30 % glass fibers, injection molding, improved laser-transparency, improved weldability, hydrolysis stabilized, NIR-laser transparent coloring (black) |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.52 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.00 | g/cm³ | ISO 60 |
收缩率 Shrinkage rate |
|||
TD:2.0 mm TD:2.0 mm 2 |
0.80 | % | |
TD:120℃,2.0 mm TD:120℃,2.0 mm 3 |
0.20 | % | |
MD:2.0 mm MD:2.0 mm 2 |
0.30 | % | |
MD:120℃,2.0 mm MD:120℃,2.0 mm 3 |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-2/5 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2/5 | |
弯曲模量 Bending modulus 4 |
|||
23℃ 23℃ 4 |
MPa | ISO 178-A | |
弯曲强度 bending strength 4 |
|||
23℃ 23℃ 4 |
MPa | ISO 178-A | |
弯曲应变 Bending strain 5 |
% | ISO 178/A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
kJ/m² | ISO 180/1U | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
熔融温度 Melting temperature 6 |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~55℃ MD:23~55℃ |
1/℃ | ||
TD:23~55℃ TD:23~55℃ |
1/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
ISO Shortname ISO Shortname |
备注 |
---|
2. 60x60x2mm |
3. 60x60x2mm, 4 hr |
4. 2.0 mm/min |
5. 2 mm/min |
6. 10°C/min |
【新闻资讯】查看全部
废塑料企业该退的增值税都收到返款了吗?
2016-01-20 《资源综合利用产品和劳务增值税优惠目录》从2015年7月1日开始实施,实施已经半年多,其中涉及废塑料企业开征资源综合利用产品和劳务增值税并有50%幅度的先征后返。 此规定已实行了半年多,据废塑料企业爆料,一些地方增值税的征收存在“只征不返”或返税不及时等现象,对企业的经营造成影响。 为了详细了解该78号文在各地的落地情况,由中国废塑料协会发起“78号文-废塑料企业增值税收缴、返还情况调查”。 现诚邀各个废塑料企业积极参与,以便形成专题研究报告 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |