牌号简介 About |
---|
20%阻燃矿物增强PPE注射成型树脂具有PPE树脂固有的尺寸稳定性,而矿物增强材料的添加增加了成品部件的强度和刚度,适用于外壳、外壳、面板和其他尺寸控制和阻燃性的应用。渴望的 20% flame-retardant mineral reinforced PPE injection molding resin Has the inherent dimensional stability of PPE resins, while the addition of mineral reinforcement increases the strength and stiffness of finished parts Suitable for such uses as enclosures, housings, panels, and other applications where dimensional control and flame retardancy are desired |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.24 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 to 0.70 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
74.1 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
3380 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
210 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
三菱化学扩展热塑性材料产品线
2021-02-08 搜料网资讯: 据外媒报道,三菱化学先进材料公司宣布:推出KyronMAX结构性热塑性材料扩展产品线,采用了新型树脂配方,以满足医疗、石油天然气、航空航天、汽车和娱乐细分市场的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |