牌号简介 About |
---|
聚酯玻璃纤维增强30%,不含PBDE/PBDF的自熄V0,耐高温,流动性好,具有很好的机械、热学和电学性能,吸水率低,尺寸稳定性好。产品成型前必须干燥。UL94 V0批准所有颜色为1.5 mm-V2,0.75 mm。UL 746B测试中。可供选择:所有颜色,热稳定(H),释放剂(W)。 PET glass fiber reinforced 30%, self extinguishing V0 without PBDE/PBDF, high temperature resistance, good flow, very good mechanical, thermal and electrical properties, low moisture absorption, good dimensional stability. Product must be dried before moulding. UL94 V0 approved all colours at 1,5 mm - V2 at 0,75 mm. UL 746B under testing. Available: all colors, heat stabilized (H), release agent (W). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.68 | g/cm³ | ASTM D792, ISO 1183 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
0.20 到 0.30 | % | |
TD TD |
0.60 到 0.80 | % | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.060 | % | ASTM D570,ISO 62 |
Granule Humidity Granule Humidity |
% | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
12000 | MPa | ASTM D638, ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638, ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ASTM D790, ISO 178 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ISO 178 | |
断裂 fracture |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm 23℃,3.2mm |
J/m | ISO 180,ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648,ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306/B50, ASTM D1525 1 | |
熔融温度 Melting temperature |
℃ | ASTM D211,ISO 121 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.75 mm 0.75 mm |
|||
1.50 mm 1.50 mm |
|||
3.20 mm 3.20 mm |
|||
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
2 mm 2 mm |
℃ | IEC 60695-2-13 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 速率 A (50°C/h), 载荷2 (50N) |
【新闻资讯】查看全部
深港两地塑胶机械协会交流
2016-07-01 6月27日,香港塑胶机械协会戴培军会长、陈青琳副会长兼秘书长及其会员企业代表一行30多人莅临深圳机械行业协会参观交流,协会会长张耀华、常务副会长兼秘书长黄少萍接待了各位来宾并作沟通交流。 香港塑胶机械协会 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |