牌号简介 About |
---|
Seblex® 7839/4 HS UV2是一种碳酸钙填充热塑性苯乙烯橡胶改性聚丙烯复合材料,已被广泛应用于石油领域。它是一种高流动注射成型等级。剪切减薄效果好,充型性能好。它具有柔韧性和低表面硬度,使其具有柔软的手感,并能满足汽车热老化和风化要求。 Seblex 7839/4 HS UV2 is a calcium carbonate filled thermoplastic styrenic rubber modified polypropylene compound which has been oil extended. It is a high flow injection moulding grade. It is also quite shear thinning and has good mould filling capability. It has been developed for flexibility and low surface hardness to give it "soft-feel" characteristics and stabilized for automotive heat ageing and weathering requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.968 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
13 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,2.00 mm Shore A, 2.00 mm |
75 | ||
邵氏 A,5 秒,2.00 mm Shore A, 5 seconds, 2.00 mm |
73 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
断裂,2 mm Fracture, 2 mm 2 |
6.70 | MPa | ASTM D412 |
100% 应变,2 mm 100% strain, 2 mm |
MPa | ||
300% 应变,2 mm 300% strain, 2 mm |
MPa | ||
拉伸应变 Tensile strain 2 |
|||
断裂,2 mm Fracture, 2 mm 2 |
% | ASTM D412 | |
撕裂强度 tear strength 3 |
|||
2.00 mm 2.00 mm 3 |
kN/m | ASTM D624 |
备注 |
---|
2. 500 mm/min |
3. C 模具, 500 mm/min |
【新闻资讯】查看全部
拓斯达在余姚中塑上分享智能化的技术和案例
2018-11-10 借塑博会之机,11月9日,广东拓斯达科技股份有限公司在浙江余姚中塑国际会展中心会议室召开“注塑企业整厂智能化解决方案讲座”。 会上,拓斯达宁波分公司总经理李欢作为主讲,向大家分享了其公司在智能化方面的技术和案例。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |