牌号简介 About |
---|
Jampilen EP340S是一种高流动性的有核异相共聚物,特别适用于需要在宽温度范围内保持良好机械性能平衡的注塑制品。Jampilen EP340S的易流动性提供了出色的可加工性和缩短的循环时间。产品采用Jampilen EP340S成型,具有卓越的冲击强度和良好的刚度。低温力学性能优异,尺寸稳定性好。Jampilen EP340S设计用于具有重大影响要求的大型物品,如箱子、板条箱、提桶和大型家用物品。其他应用包括薄壁容器、玩具、电器组件、电池盒和一些较小的物品,如盖子、瓶盖和花盆。Jampilen EP340S适用于食品接触。 |
产品描述 Product Description
用途:家电部件;薄壁容器;桶;草坪和园林设备;家用货品;电池盒;玩具;容器;护罩;外壳;装货箱;
加工条件:注射成型 Injection Molding
性能特点: 成核的; 机械强度好; 尺寸稳定性好; 成型周期快; 共聚物; 耐低温; 流动性高; 冲击性能好; 食品接触; 易加工; Good Rigidity,Excellent Processability,High impact resistance,Good Dimensional Stability,High liquidity,Antifreeze,Nucleation,Quick molding cycle,Food contact compliance,Copolymer
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
42 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃ -20℃ |
45 | J/m | |
23℃ 23℃ |
75 | J/m | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
100 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 1 | |
加速干燥箱老化 Accelerate oven aging |
|||
150℃ 150℃ |
hr | ASTM D3012 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
ASTM D2457 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
一纸“限塑令”引发疯狂的产能大跃进
2021-05-13 搜料网资讯: 一纸限塑令下,竟然激发了造纸、纸浆模制造,以及可 降解塑料 行业的产能大跃进。面对4600万吨规划造纸产能和逾千万吨规划可降解塑料产能,332万吨的可降解塑料需求 |