牌号简介 About |
---|
Exron 3011 HS是一种45%玻璃纤维增强的耦合聚丙烯化合物。它是一种中到高流量的注塑级产品,适用于具有良好的抗蠕变性能、高热变形温度、极高的刚性和良好的冲击强度的部件。它已经稳定下来,能够在150℃下满足21天的汽车热老化要求。 Extron 3011 HS is a 45% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring excellent creep resistance with high heat deflection temperatures, very high rigidity and good impact strength. It has been stabilized to meet automotive heat aging requirements of 21days at 150°C. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.27 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10-0.40 | % | ASTM D995 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
7.00 | g/10min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
160 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
152 | ℃ | ASTM D648 |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
R 级 | ASTM D785 | |
邵氏A15秒 Shore A15 seconds |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
我国首个自营深水大气田“深海一号”建成投产
2021-06-27 搜料网资讯: 25日自中国海油获悉,由中国自营勘探开发的首个1500米超深水大气田深海一号在海南岛东南陵水海域正式投产,标志着中国海洋石油勘探开发能力全面进入超深水时代。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |