牌号简介 About |
---|
F615G30FR是GF30%增强聚对苯二甲酸乙二醇酯(PET)。F615G30FR具有良好的燃烧性能,可燃性为UL94 VU 0。 Features F615G30FR is GF30% reinforced polyethylene terephthalate (PET). F615G30FR has good properties with flammability UL94 V_0 Application Electrical & Electronic Drying Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.67 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 到 0.90 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
断裂 fracture 2 |
147 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
2.3 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
10100 | MPa | ASTM D790 |
弯曲强度 bending strength 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm 23℃,3.2mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.20 in/min |
3 0.12 in/min |
【新闻资讯】查看全部
EDI新一代模头 唇调节零碎“行程”大幅进步
2016-08-10 Nordson 于8月8日宣布,Nordson Corporation 重新设计了广泛使用的 EDITMAutoflex VI 挤出平模头,将模唇调节系统的“行程”增大了 43% 而没有增加响应时间。这使其能够适应产品制程中更大范围的变化而无需人工干预。该公司将在 K 2016 展会(2 号展厅,G06 展位)上推出这套新系统。 新型 Autoflex VI-E 模唇调节系统的设计还大幅减小了尺寸,变得更加精简,更容易拆卸,这大幅缩短了维护时间。 虽然所有配 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |