牌号简介 About |
---|
聚丙烯抗冲击共聚物。TitanPro SM850是一种有核超高流量材料。基础树脂符合21 CFR 177.1520(a)(3)(i)和(c)3.1a中规定的美国食品药品监督管理局的要求。佐剂符合各自的FDA法规和21 CFR 177.1520(b)。总之,该树脂符合FDA标准,包括聚烯烃制品和食品接触用制品的成分的安全使用。TSCA注册:CAS 9010-79-1应用:汽车零件、家庭用品、洗衣机浴缸和零件、大型平板托盘、薄壁容器。特点:易加工,设计自由度大,低温韧性好,表面光洁度和色泽好,应力低,热稳定性好。制造:设备。柱塞或螺杆注射机和技术。标准加工。 Polypropylene impact copolymer. Titanpro SM850 is a nucleated extra high flow material. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1 APPLICATIONS: Automotive parts, housewares, washing machine tub and parts, large flat trays, thin walled containers. Characteristics: Easy processability, permitting wider latitude in design, good toughness at low temperature, good surface finish and color, low molded in stress and excellent heat stability. FABRICATION: Equipment - ram or screw injection machines and techniques - standard processing. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
45 | g/10min | ASTM D1238 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.020 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
69 | J/m | ASTM D256-A |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
|||
-29℃ -29℃ |
21.6 | J | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
氮肥、甲醇行业应勇于扛起碳减排重任
2021-08-28 搜料网资讯: 编者按 合成氨、甲醇行业在石化和化工的子行业中碳排放量名列前茅。据统计,2020年合成氨、甲醇行业二氧化碳(CO ₂ )的排放量分别占石化和化工行业排放总量的19.9%和 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |