牌号简介 About |
---|
Tecatron PPS是一种高性能热塑性塑料,具有良好的机械性能和优异的耐热和耐化学性能。没有已知的溶剂能在低于392°F的温度下溶解Tecatron PPS。其低离子杂质使其成为高纯度应用的最佳选择。Tecatron GF40是一种玻璃增强材料,具有极高的强度和优异的耐化学性能。Tecatron PVX是一种轴承级PPS,适用于高负荷应用。Tecatron PPS的优异耐热性和耐化学性以及离子杂质使其成为需要低排气和高纯度应用的最佳选择。Tecatronpps通常用于汽车、电气/电子、工业、机械、电器和半导体行业。 TECATRON™ PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON™ PPS at temperatures below 392°F. Its low ionic impurities make it an excellent choice for applications where high purity is a concern. TECATRON™ GF40 is a glass reinforced material that offers extremely high strength along with excellent chemical resistance properties. TECATRON™ PVX is a bearing grade PPS that is suitable for high load applications. TECATRON™ PPS's excellent thermal and chemical resistance along with its ionic impurities make an excellent choice for applications requiring low outgassing and high purity. TECATRON™PPS is typically used in the automotive, electrical/ electronic, industrial, mechanical, appliance and semiconductor industries. High purity characteristics Outstanding retention of mechanical properties under continuous use up to 338°F (170°C) Excellent chemical resistance Good electrical insulator High mechanical strength High strength-to-weight ratio Corrosion resistant Dimensional stability over wide variations of temperature and moisture Creep resistance |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.64 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.020 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
14000 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
185 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
1.9 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
熔融温度 Melting temperature |
℃ | ASTM D2133 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
比热 specific heat |
J/kg/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
最高使用温度 Maximum operating temperature |
|||
Intermittent Intermittent |
℃ | ||
长期 long-term |
℃ | UL 746B | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 2 |
|||
23 ℃,1 MHz 23 ℃,1 MHz 2 |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
23℃,60 Hz 23℃,60 Hz |
ASTM D150 | ||
23℃,1 MHz 23℃,1 MHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 50% RH |
【新闻资讯】查看全部
陈昌杰:中国塑料软包装大而不强 绿色化实属肯定
2016-01-14 在一个软包装际峰会上,中国包装联合会塑料委专家委员会副主任兼秘书长陈昌杰指出,虽然中国是塑料软包装的生产使用大国,但存在大而不强的问题,未来需要在产品质量和技术水平上加大投入力度。 与发达国家相比存在很大差距 陈昌杰表示,塑料软包装材料是塑料包装材料中的一个主力军,用量为整个塑料包装材料的45%左右,其应用几乎遍及国民经济的所有领域,在食品等日用商品方面的应用,和其他包装材料相比更占有明显的优势。 目前中国塑料软包装材料年生产量估计已达100 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |