Prime PP PO 500
PP共聚 & 美国Primex Plastics
MAJORIS AN081
PP共聚 & 法国AD Majoris
牌号信息 |
PP共聚 & 美国Primex Plastics 指导价格:暂无 塑料库存: 缺货 |
PP共聚 & 法国AD Majoris 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
PO 500是一种聚烯烃,具有共聚物聚丙烯的许多物理性质。聚丙烯的熔融指数、密度、弯曲模量、热变形和伊兆欧都是典型的聚丙烯材料。标准级聚丙烯的加工窗口很小,热强度很低。该产品是为热成型而设计的,具有比典型聚丙烯更好的热熔强度。一些树脂制造商提供高热强度聚丙烯,但它携带溢价。用途:PO 500适用于任何需要聚丙烯材料的热成型产品。它是辊送成形和大断面板料成形的理想选择。加工:采购订单500热成型,如高密度聚乙烯。模具收缩率可能略高于聚丙烯。表面处理:我们的订单500产品可能使用与聚丙烯相同的表面处理技术。它可以通过锯切、走线、钻孔、模切或冲压进行切割或修剪。它可以通过声波焊接制造到其他PO 500零件上。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:采购订单500可以颜色匹配您的具体要求。PO 500的纹理与任何聚丙烯的相同。厚度范围从0.013到0.400不等,宽度可达120“。 PO 500 is a Polyolefin that has many of the physical properties of a Copolymer Polypropylene. The melt index, density, flex modulus, heat deflection and izod are typical of Polypropylene. Standard grades of Polypropylene have a very small processing window with very little hot strength. This product was designed for thermoforming and has better hot melt strength than typical Polypropylene. Some resin manufacturers offer a high hot strength PP, however, it carries a premium. Applications: PO 500 was designed for any thermoformed product that requires a Polypropylene material. It is ideal for roll fed forming as well as large cut sheet forming. Processing: PO 500 thermoforms like HDPE. The mold shrink may be slightly higher than Polypropylene. Finishing: The same type of finishing techniques used on Polypropylene may be used on our PO 500 product. It may be cut or trimmed by sawing, routing, drilling, die cutting or punching. It may be fabricated to other PO 500 parts by sonic welding. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: PO 500 can be color matched to your specific requirements. The same textures are available for PO 500 as for any Polypropylene. A range of thicknesses from .013 to .400 are available with widths up to 120". |
AN081是一种用于注塑、挤出和吹塑的聚丙烯共聚物。应用AN081推荐用于以下应用:加热器外壳,破裂储液罐 AN081 is a polypropylene copolymer for injection moulding, extrusion and blow moulding. APPLICATIONS AN081 is recommended for applications like: Heater housings Break fluid reservoirs |
|
产品描述 | |||
厂家: | 美国Primex Plastics | 法国AD Majoris | |
类别: | PP共聚 PP copolymer | PP共聚 PP copolymer | |
填料: | |||
用途: | 外壳,汽车领域的应用 | ||
性能特点: | 冲击性能好,拉伸性能好,共聚物,超声波焊接 High impact resistance,Good Tensile Strength,Copolymer,Ultrasonic soldering | 可回收,共聚物,防火阻燃等级HB Renewable resources,Copolymer,HB | |
加工条件: | 热成型 Thermo forming | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 0.079 in/min
|
价格走势对比图
PP共聚 Prime PP PO 500
PP共聚 MAJORIS AN081
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交