ADEKA EP-4530
环氧树脂 & 日本艾迪科
BCC BC 5200 Resins
环氧树脂 & 美国BCC Products
牌号信息 |
环氧树脂 & 日本艾迪科 指导价格:暂无 塑料库存: 缺货 |
环氧树脂 & 美国BCC Products 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
工业厂房和厨房的高硬度无定形地板 High hardness, amorphous Floors of industrial plant and kitchen |
BC 5200是一种中粘度快速胶凝双组分环氧胶粘剂体系。由于易于使用的1:1混合比,BC 5200被认为是一种良好的通用粘合剂,在车间使用。BC 5200将与木材、混凝土、塑料和大多数金属表面粘合。表面处理:要粘附的区域应清洁干燥,无灰尘、油和释放剂。建议在使用前用砂纸将表面翻松。混合说明:按重量或体积将1份树脂与1份硬化剂混合。设定时间为4至4.5分钟。可通过摊铺或铺条以任何合理厚度施涂。不要使用超过4分钟可使用的材料。表面应保持在适当的位置,直到固化受到影响。 BC 5200 is a medium viscosity fast gelling two part Epoxy Adhesive System. With an easy to use 1 to 1 mix ratio, BC 5200 is considered an excellent general purpose adhesive for in-shop use. BC 5200 will bond to wood, concrete, select plastics, and most metal surfaces. Surface Preparation: Areas to be adhered to should be clean and dry, free of dust, oil, and release agents. It is advisable to scarify the surface with sand paper prior to application. Mixing Instructions: Combine 1 part of Resin to 1 part of Hardener by weight or by volume. Setting time is 4 to 4.5 minutes. May be applied by any reasonable thickness by spreading or splining. Do not work with more material than can be applied in 4 minutes. Surfaces should be held in position until cure is affected.p |
|
产品描述 | |||
厂家: | 日本艾迪科 Adeka | 美国BCC Products | |
类别: | 环氧树脂 环氧树脂 | 环氧树脂 环氧树脂 | |
填料: | |||
用途: | 地板材料 | 粘合剂 | |
性能特点: | 硬度高,无定形的 Good Hardness,Amorphous | 快速凝固晶点 Rapid solidification poin | |
加工条件: |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
环氧树脂 ADEKA EP-4530
环氧树脂 BCC BC 5200 Resins
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交