Alathon® M4621
HDPE共聚 & 荷兰利安德巴塞尔
Eltex® B4020N1343
HDPE共聚 & 瑞士英力士苯领
牌号信息 |
HDPE共聚 & 荷兰利安德巴塞尔 指导价格:暂无 塑料库存: 缺货 |
HDPE共聚 & 瑞士英力士苯领 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
Alathon M4621是一种具有优异的抗应力开裂和低温冲击强度的共聚物。典型应用包括小型两件式发动机气罐、废物处理桶和专用注塑件。 ALATHON M4621 is a copolymer that provides outstanding stress crack resistance and low temperature impact strength. Typical applications include small two-piece engine gas tanks, waste disposal drums, and specialty injection molded parts. |
Eltex® B4020N1343是一种高密度聚乙烯共聚物,特别适用于饮料包装用螺帽的注射成型和压缩成型。特别适用于要求高抗环境应力开裂的场合。由于hgih的纯度和良好的感官性能,该等级特别适用于与饮料直接接触的包装。典型应用:用于包装发泡水和碳酸软饮料的瓶盖和瓶盖的优点和特点:非常好的抗应力开裂性能优异的加工性能高冲击强度优异,质量可控的感官性能。为了保持良好的感官性能,在加工过程中不要超过250°C的熔融温度。含助滑剂,使用方便,开启方便。必须避免直接暴露在阳光下,因为滑脱剂对光敏感,其降解会使饮料产生味道。 Eltex® B4020N1343 is a high density polyethylene copolymer particularly intended for the injection molding and compression molding of screw caps for the packagin of beverages. It is especially suitable for applications requiring high environmental stress cracking resistance. Thanks to hgih purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contract with beverages. Typical applications: Caps & closures for the packaging of sparkling water and carbonated soft drinks Benefits and Features: Very good stress cracking resistance Excellent processing performances High impact strength Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing. Grade containing slip agent ensuring easy application and opening. Exposure to direct sunlight has to be avoided as the slip agent is light sensitive and its degradation can give off-taste to the beverage. |
|
产品描述 | |||
厂家: | 荷兰利安德巴塞尔 LyondellBasell | 瑞士英力士苯领 INEOS | |
类别: | HDPE共聚 HDPE copolymer | HDPE共聚 HDPE copolymer | |
填料: | |||
用途: | 鼓,油箱,容器 | 护罩,外壳 | |
性能特点: | 耐低温冲击,抗应力开裂 low-temperature impact resistance,High ESCR | 易加工,高纯度,冲击性能好,高光滑性,感官性好,共聚物,高密度,抗应力开裂 Excellent Processability,High purity,High impact resistance,Smoothness,Good sensory characteristics.,Copolymer,High density,High ESCR | |
加工条件: | 注射成型 Injection Molding | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
HDPE共聚 Alathon® M4621
HDPE共聚 Eltex® B4020N1343
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交