LLDPE，SABIC® LLDPE 6218BE对比LLDPE，SABIC® LLDPE 218BE (Film)物性表,价格行情_搜料

牌号信息	SABIC® LLDPE 6218BE 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® LLDPE 218BE (Film) 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	SABIC® LLDPE 6218BE是一种用于浇铸薄膜的己烯线性低密度聚乙烯树脂。该产品经过特殊配方设计，在高温下具有最佳的热稳定性，用于铸膜挤出。SABIC® LLDPE 6218BE铸膜具有良好的光学性能、韧性、抗穿刺性和撕裂强度。后缀e表示欧洲血统。应用SABIC® LLDPE 6218BE树脂通常用于托盘拉伸包装（预拉伸）、高性能拉伸膜和其他单层和共挤膜应用，需要高强度。为提高强度，建议与乙烯/丁烯共聚物LLDPE和LDPE共混。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LLDPE 6218BE is a hexene linear low density polyethylene resin for cast film applications. The product has been specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast films produced from SABIC® LLDPE 6218BE exhibit good optical properties, improved toughness, puncture resistance and tear strength. The suffix E denotes European origin. Application SABIC® LLDPE 6218BE resin is typcially used for pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. The grade is also suggested for blending with ethylene/butene copolymer LLDPE and LDPE for improving strength. This product is not intended for and must not be used in any pharmaceutical/medical applications.	SABIC LLDPE 218BE是一种带有添加剂包装的丁烯线性低密度聚乙烯树脂，通常设计用于更广泛的食品应用（不含TNPP）。良好的热稳定性允许在关键的挤压加工条件下使用树脂。SABIC LLDPE 218BE制备的薄膜与较低的MFR LLDPE树脂相比，具有更好的拉伸性能。应用吹塑膜：SABIC LLDPE 218BE通常用于食品应用（层压膜、阻挡膜），但也可用于工业包装，并作为与其他SABIC PE树脂在吹塑和铸膜应用中的混合伙伴。铸膜：SABIC LLDPE 218BE通常用于食品应用（层压膜、阻挡膜）和托盘手包。色母粒复合：适用于薄膜和吹塑应用中的添加剂色母粒（如滑模剂、防雾剂、防静电剂、热稳定剂）。本文所述产品尤其未经测试，因此未经验证可用于医药/医疗应用。 SABIC® LLDPE 218BE is a butene linear low density polyethylene resin with an additive package typically designed for a broader range of food applications (TNPP free). The good thermal stability allows to use the resin in critical extrusion processing conditions. Films produced from SABIC® LLDPE 218BE have better draw-down ability compared to lower MFR LLDPE resins. SABIC® LLDPE 218BE is a Linear Low Density Polyethylene natural resin typically used for wire and cable applications. SABIC® LLDPE 218BE contains a high level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits good Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Application Blown Film: SABIC® LLDPE 218BE is typically used for food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC® PE resins in both blown and cast film applications. Cast Film: SABIC® LLDPE 218BE is typically used for food applications (lamination film, barrier film) and pallet hand wrap. Masterbatch Compounding: It is suitable for additive masterbatches (eg. slip agents, anti fog agents, anti static agents, thermal stabilizers) in film and blow moulding applications. Wire & Cable Extrusion: Telecommunication and Power cable (LV, MV, HV) jacketing. Halogen-free flame retardant (HFFR) compounds. One-step or two-steps silane crosslinkable for cable insulation. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	LLDPE Linear low density polyethylene	LLDPE Linear low density polyethylene
填料：
用途：	流延薄膜,混合,拉伸缠绕	复合,包装,工业应用,薄膜,非特定食品应用,混合,母料,流延薄膜,吹膜
性能特点：	韧性好,光学性能,抗氧化,低密度,机械强度好-撕裂,抗穿孔性,己烯共聚单体,热稳定性好 Good flexibility,Optical performance,Inoxidizability,Low density,Good tear strength,Puncture Resistant,Hexene copolymers,Heat Stabilized	食品接触,抗氧化,低密度,丁烯共聚单体,热稳定性好 Food contact compliance,Inoxidizability,Low density,Butylene copolymer,Heat Stabilized
加工条件：	流延薄膜	吹塑薄膜

技术参数

物理性能
PHYSICAL SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183/A

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

薄膜
SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

Elastic Recovery(铸造薄膜，20.0 µm)
Elastic Recovery (cast film, 20.0 µ m) % ASTM D5459

Protrusion Puncture Resistance - 铸造薄膜(20.0 µm)
Corrosion Function Resistance - Cast thin film (20.0 µ m) J ASTM D5748

Retention Force(60 sec，20.0 µm)
Retention Force（60 sec，20.0 µm） g

Stress Retention(铸造薄膜，20.0 µm)
Stress Retention (cast film, 20.0 µ m) % ASTM D5459

Ultimate Pre(stretch Level 铸造薄膜，20.0 µm)
Ultimate Pre-stretch Level - Cast Film (20.0 µm) %

薄膜厚度(测试)
film thickness µm

热性能
THERMAL SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

熔融温度(DSC)
Melting temperature ℃ 内部方法

维卡软化温度
Vicat Softening Temp ℃ ISO 306/A

光学性能
OPTICAL SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

光泽度(45°，20 µm，铸造薄膜)
gloss ASTM D2457

雾度(20.0 µm，铸造薄膜)
Haze % ASTM D1003A

补充信息
SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

Peel Cling(0% pre-stretch：20.0 µm)
Peel Cling g/2.5 cm ASTM D5458

Peel Cling(200% pre-stretch：20.0 µm)
Peel Cling g/2.5 cm ASTM D5458

撕裂强度(TD，20 µm)
tear strength kN/m ISO 6383-2

落锤冲击(20.0 µm，铸造薄膜)
Drop hammer impact J/cm ISO 7765-2

电气性能
ELECTRICAL SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

介电常数(60 Hz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm ASTM D257

耗散因数(60 Hz)
Dissipation factor ASTM D150

机械性能
MECHANICAL SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

弯曲模量(1% 正割)
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(断裂)
tensile strength MPa ASTM D638

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

加工方式

挤出 SABIC® LLDPE 6218BE SABIC® LLDPE 218BE (Film) 单位测试方法

熔体温度 °C

备注

1 一般属性：这些不能被视为规格。

2 Cast Film

1 一般属性：这些不能被视为规格。

2 Cast Film


相关资讯

牌号简介
产品描述
技术参数
物理性能
薄膜
热性能
光学性能
补充信息
电气性能
机械性能
加工方式
挤出
备注
返回顶部

LLDPE，SABIC® LLDPE 6218BE对比LLDPE，SABIC® LLDPE 218BE (Film)对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别