Boda BDF60C
氟橡胶 & 成都晨光博达
3M™ Dyneon™ Fluoroelastomer FE 5520
氟橡胶 & 美国3M
牌号信息 |
氟橡胶 & 成都晨光博达 指导价格:暂无 塑料库存: 缺货 |
氟橡胶 & 美国3M 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
BDF60C是一种中粘度固化型含氟弹性体共聚物。该牌号非常适合于需要良好工艺性能、流变性能和低压缩永久变形的应用。BDF60C可以复合以满足主要的氟橡胶规格。BDF60C是通用级。可用于O形圈和垫片的压塑成型。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDF60C is a medium viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good process properties, rheological properties and low compression set are required. BDF60C can be compounded to meet the major fluoroelastomer specifications. BDF60C is a general purpose grade. It can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
3M™ Dyneon™ Fluoroelastomer FE 5520是一种由六氟丙烯、偏氟乙烯和四氟乙烯制成的三元共聚物。Fe5520具有合并双酚固化系统。特点组成:低氟偏氟乙烯、六氟丙烯和四氟乙烯三元共聚物具有良好的压缩永久性、清洁运行和良好的模具释放工艺目标:注射和转移成型比标准二元共聚物和三元共聚物具有更好的低温柔韧性。orated cure技术典型应用3M™ Dyneon™ Fluoroelastomer FE 5520是汽车燃油系统和油封应用的理想选择,尤其是燃油喷射系统的O形密封圈。 3M™ Dyneon™ Fluoroelastomer FE 5520 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FE 5520 has an incorporated bisphenol cure system. Special Features Composition: Low fluorine content terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene Good compression set resistance Clean running with excellent mould release Process target: injection and transfer moulding Improved low temperature flexibility over standard dipolymers and terpolymers Proprietary incorporated cure technology Typical Applications 3M™ Dyneon™ Fluoroelastomer FE 5520 is ideal for automotive fuel system and oil seal applications, especially O-ring seals for fuel injection systems. |
|
产品描述 | |||
厂家: | 成都晨光博达 Fluoro | 美国3M | |
类别: | 氟橡胶 氟橡胶 | 氟橡胶 氟橡胶 | |
填料: | |||
用途: | 通用,垫圈 | O型圈,密封件,汽车领域的应用 | |
性能特点: | 易加工,尺寸稳定性好,共聚物 Excellent Processability,Good Dimensional Stability,Copolymer | 尺寸稳定性好,含脱模剂,三元共聚物 Good Dimensional Stability,Good stripping performance,Terpolymer | |
加工条件: | 压缩模塑 | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
|
1 一般属性:这些不能被视为规格。
2 D 模具
3 Die D
4 Post cured 24 hours @ 260°C
5 Post cured 16 hours @ 230°C
|
价格走势对比图
氟橡胶 Boda BDF60C
氟橡胶 3M™ Dyneon™ Fluoroelastomer FE 5520
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交