FEP,Teflon® FEP 9835对比FEP,Teflon® FEP 106对比物性表,价格行情_搜料_soliao

提示关闭
搜料正在加紧备货中!
免费注册搜料>
1.可以终身免费查看下载各种塑胶原材料的报价单、物性表、FDA/ROHS/防火/COA等资料。
2.无门槛领取采购现金券。
3.获取免费材料样品机会。
已注册用户
姓名 公司名称
×

您当前的位置: 首页 > 型号对比

牌号信息
高亮区别 隐藏相同

Teflon® FEP 9835

FEP & 美国科慕

Teflon® FEP 106

FEP & 美国科慕

单位
测试方法
物性对比 价格对比
高亮区别 隐藏相同
牌号信息

Teflon® FEP 9835 物性表

FEP & 美国科慕

指导价格:暂无

塑料库存: 缺货

Teflon® FEP 106 物性表

FEP & 美国科慕

指导价格:暂无

塑料库存: 缺货

牌号简介 杜邦特氟隆FEP9835是一种可熔融加工的氟塑料树脂,可制成颗粒。它是四氟乙烯和六氟丙烯的共聚物,不含添加剂,符合ASTM D 2116 II型的要求。特氟隆FEP9835具有较高的熔体流动速率和优良的电性能,特别设计用于高速挤压双绞线结构的小尺寸电线上的薄层。该树脂具有低压应用所需的电气和机械性能。此外,特氟隆FEP9835比其他大多数氟塑料树脂具有更高的熔体流动速率。这使得挤压速度更快,加工更容易,使特氟隆FEP 9835成为生产薄壁挤压件的一种经济有效的替代品。特氟隆FEP 9835的设计和制造是为了在特定的钢丝绳工艺条件下提高对铜线的粘合力,在高频下降低损耗系数,并使显著的金属板外露。熔融挤压阻力。在氮气注入过程中,当与适当的核素一起使用时,它适用于固体绝缘体和泡沫绝缘体。当生产具有氟塑料树脂优良性能的产品需要传统的挤压和成型工艺时,使用特氟隆FEP9835。与其他热塑性塑料相比,特氟隆FEP9835具有较高的熔融强度和热稳定性,可以提高加工速度。与其他氟塑料相比,耐高温蠕变性能提供了优越的平衡性和最终使用性能。特氟隆FEP9835结合了传统热塑性塑料的易加工性,具有许多类似于聚四氟乙烯的特性。由纯聚四氟乙烯FEP 9835树脂制成的经过适当加工的产品具有氟塑料树脂的优良特性:化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、性能。耐高温,耐候性好,在火焰条件下,特氟隆FEP9835产品不着火,不促进火焰蔓延。当被其他来源的火焰点燃时,它们的热量贡献很小,并且以很低的烟以缓慢的速度添加。 DuPont™ Teflon ® FEP 9835 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 type II. With a relatively high melt flow rate and excellent electrical properties, Teflon ® FEP 9835 has been specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions. This resin provides the electrical and mechanical properties needed for low voltage applications. In addition, Teflon ® FEP 9835 has a higher melt flow rate than most other fluoroplastic resins. This permits higher extrusion speeds and easier processing, making Teflon ® FEP 9835 a cost-effective alternative for producing thin-wall extrusions.Teflon ® FEP 9835 is designed and made to have improved adhesion to copper wire under specific wireline process conditions, low dissipation factor at high frequencies, and to have significant plate-out resistance in melt extrusion. It is suitable as a solid insulator, and as a foamed insulator when used with an appropriate nucleant in a nitrogen gas injection process. Teflon ® FEP 9835 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® FEP 9835 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ® FEP 9835 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Properly processed products made from neat Teflon ® FEP 9835 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.In a flame situation, products of Teflon ® FEP 9835 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
      
出于库存控制目的,产品名称后面可以跟一个X。标记为FEP 106和FEP 106 X的产品是等效的,本文件中的所有信息都适用于这两者。典型应用:小直径、薄壁电线和电缆绝缘。通过注射成型制造的复杂或薄壁零件。杜邦Teflon® FEP 106是一种不含添加剂的四氟乙烯和六氟丙烯的熔融加工共聚物,符合ASTM D 2116 II型的要求。它提供了特氟隆氟聚合物树脂的优良特性组合:无老化特性、化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、在温度下的性能。极端气候条件和良好的耐候性。Teflon® FEP 106是特氟隆FEP的“高生产率”等级。它是专为挤压薄壁,小直径电线绝缘。也可用于复杂和薄壁零件的注塑成型。在加工温度下,它显示出低粘度和高临界剪切速率。在类似的线结构中,它可以以比通用级特氟隆FEP 100更高的挤出线速度挤出。应力抗裂性是确定最终使用性能的重要因素。经验表明,在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高,树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议,对于涉及重复热循环和弯曲循环的应用,应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP 106 and FEP 106 X are equivalent and all information in this document is applicable to both. Typical Application Small diameter, thin wall wire and cable insulations. Intricate or thin wall parts made by injection moulding. DuPont Teflon® FEP 106 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type II. It offers the excellent combination of properties characteristic of Teflon® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance. Teflon® FEP 106 is a "high productivity" grade of Teflon® FEP. It is designed for the extrusion of thin wall, small diameter wire insulations. It can also be used for injection moulding of intricate and thin wall parts. At processing temperatures it shows low viscosity and a high critical shear rate. In similar wire constructions it can be extruded at higher extrusion line speeds than the general purpose grade Teflon® FEP 100. Stress-crack resistance is an important element in establishing end-use performance. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications".
      
产品描述
厂家: 美国科慕 Chemours 美国科慕 Chemours
类别: FEP   FEP FEP   FEP   
填料:         
用途: 低压绝缘,薄壁绝缘,通信电线绝缘材料,电线电缆应用   电线电缆应用,绝缘材料,薄壁包装     
性能特点: 耐候抗UV,无粘性,韧性好,电气性好,易流动,耐高温,耐化学性,热稳定性好,防火阻燃等级V-0   Weather resistance is good,No viscosity,Good flexibility,Good Electrical Properties,Good liquidity,High Heat Resistance,Solvent resistance,Heat Stabilized,V-0 耐候抗UV,韧性好,低粘度,低摩擦系数,食品接触,耐高温,共聚物,耐化学性,低吸湿性,防火阻燃等级V-0   Weather resistance is good,Good flexibility,Low Viscosity,Low coefficient of friction,Food contact compliance,High Heat Resistance,Copolymer,Solvent resistance,Low moisture absorption,V-0   
加工条件: 挤出   Extrusion 吹塑成型      
技术参数
物理性能
PHYSICAL
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
吸水率(24hr)
Water absorption rate
% ASTM D570
密度
Density
g/cm³ ASTM D792
密度
Density
g/cm³ ISO 1183
密度(--)
Density
g/cm³ ASTM D792
密度(--)
Density
g/cm³ ISO 1183
熔体质量流动速率(372℃,5.0kg)
Melt Flow Rate
g/10min ASTM D2116
熔体质量流动速率(372℃,5.0kg)
Melt Flow Rate
g/10min ISO 12086
机械性能
MECHANICAL
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
弯曲模量(23℃)
Bending modulus
MPa ASTM D790-A
弯曲模量(23℃)
Bending modulus
MPa ISO 178
拉伸应变(断裂,23℃)
Tensile strain
% ASTM D638
拉伸应变(断裂,23℃)
Tensile strain
% ISO 12086
拉伸强度(23℃)
tensile strength
MPa ASTM D638
拉伸强度(屈服,23℃)
tensile strength
MPa ASTM D638
拉伸强度(屈服,23℃)
tensile strength
MPa ISO 12086
邵氏硬度(邵氏 D)
Shore hardness
  ASTM D2240
邵氏硬度(邵氏 D)
Shore hardness
  ISO 868
热性能
THERMAL
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
熔融温度
Melting temperature
熔融温度
Melting temperature
ASTM D4591
连续使用温度
Continuous use temperature
电气性能
ELECTRICAL
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
介电常数(1 kHz)
Dielectric constant
  ASTM D150
介电常数(1 MHz)
Dielectric constant
  ASTM D150
介电常数(1.00 GHz)
Dielectric constant
  ASTM D150
介电常数(1.00 GHz)
Dielectric constant
  ASTM D2520
介电强度(0.25 mm)
Dielectric strength
kV/mm ASTM D149
介电强度(0.25 mm)
Dielectric strength
kV/mm IEC 60243-1
相对电容率(1 kHz)
Relative permittivity
  IEC 60250
相对电容率(1 MHz)
Relative permittivity
  IEC 60250
相对电容率(1.00 GHz)
Relative permittivity
  IEC 60250
耗散因数(1 GHz)
Dissipation factor
  ASTM D150
耗散因数(1 GHz)
Dissipation factor
  ASTM D2520
耗散因数(1 GHz)
Dissipation factor
  IEC 60250
耗散因数(1 kHz)
Dissipation factor
  ASTM D150
耗散因数(1 kHz)
Dissipation factor
  IEC 60250
耗散因数(1 MHz)
Dissipation factor
  ASTM D150
耗散因数(1 MHz)
Dissipation factor
  IEC 60250
阻燃性能
FLAMMABILITY
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
极限氧指数
Extreme oxygen index
% ASTM D2863
极限氧指数
Extreme oxygen index
% ISO 4589-2
阻燃等级
Flame retardant level
  UL 94
补充信息
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
Critical Shear Rate(372℃)
Critical Shear Rate(372℃)
sec^-1 Internal Method
Guide DDR Range(for cable extrusion)
Guide DDR Range(for cable extrusion)
 
MIT耐折强度(8 mil film,200.0 µm)
MIT flexural strength (8 mil film, 200.0 µ m)
Cycles ASTM D2176
MIT耐折强度(film,200.0 µm)
MIT flexural strength (film, 200.0 µ m)
Cycles ASTM D2176
冲击性能
IMPACT
Teflon® FEP 9835 Teflon® FEP 106 单位
UNIT
测试方法
TEST METHOD
悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch
  ASTM D256
悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch
  ISO 180
备注
1 一般属性:这些不能被视为规格。
2 方法A(短时间)
3 .25 mm film
4 Short Time, .25 mm film
1 一般属性:这些不能被视为规格。
2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability.
3 ASTM D4591 / D3418
4 方法A(短时间)
5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value
  • 返回顶部返回顶部

价格走势对比图

FEP      Teflon® FEP 9835

FEP      Teflon® FEP 106

开始时间:结束时间:   
【牌号齐全,内容全面】 全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情 【精准,及时,权威!】 专业团队挖掘行情信息,第一时间发布行情
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
目录
我要询价    客服热线:400-6700-720
型号 类别 厂家 产地 颜色 首期使用量 后期使用量 包装 交期 成型产品 操作
GP-525N GPPS VATAA土耳其地区 亚太地区
价格:    含税     不含税     付款方式:    留言:

单据状态:未提交

我要询价
客服热线:400-6700-720

前往询价车
选择牌号
牌号 类别 厂家
暂无数据
该牌号已存在对比列表中 请选择其他牌号进行对比

您现在是未登录状态,想查看完整信息

登录免费注册