Andur 800 AP/Curene® 442
PUR-酯/醚+TDI & 美国Anderson
Andur 2-920 AP/Curene® 442
PUR-酯/醚+TDI & 美国Anderson
牌号信息 |
PUR-酯/醚+TDI & 美国Anderson 指导价格:暂无 塑料库存: 缺货 |
PUR-酯/醚+TDI & 美国Anderson 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
ANDUR 800-AP是经过多年研究开发的一种高性能、低成本的聚氨酯浇铸预聚物。该新产品为聚酯/醚、甲苯二异氰酸酯封端预聚物。通过与Curene 442反应得到硬度为80邵尔A的弹性体。较低硬度的弹性体可以通过与各种多元醇反应,并与curene 442和其他二胺或与增塑剂结合而得到。 Andur 800-AP is the result of several years of research to develop a high performance, moderate cost prepolymer for the cast urethane industry. This new product is a poly-ester/ether, toluene diisocyanate-terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained by reaction with Curene 442. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or with plasticizers. |
andur 2-920ap是一种聚酯/聚醚TDI端接共聚合物,适用于聚氨酯弹性体的制备。当用Curene442[4,4’-亚甲基双(邻氯苯胺)固化时,将产生具有92邵尔A硬度的弹性体。较低硬度的弹性体可以通过使用Curene 442和多元醇和其他二胺酸盐的混合物,或通过使用增塑剂获得。 Andur 2-920AP is a polyester/polyether TDI terminated coprepolymer suitable for the preparation of urethane elastomers. When cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)], an elastomer with 92 Shore A hardness will be produced. Elastomers of lower hardness can be obtained using blends of Curene 442 and polyols and other diamine curatives, or by the use of plasticizers. |
|
产品描述 | |||
厂家: | 美国Anderson | 美国Anderson | |
类别: | PUR-酯/醚+TDI PUR-酯/醚+TDI | PUR-酯/醚+TDI PUR-酯/醚+TDI | |
填料: | |||
用途: | |||
性能特点: | 耐水解,耐化学性 Hydrolysis stability,Solvent resistance | 耐水解,耐化学性 Hydrolysis stability,Solvent resistance | |
加工条件: |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
PUR-酯/醚+TDI Andur 800 AP/Curene® 442
PUR-酯/醚+TDI Andur 2-920 AP/Curene® 442
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交