LDPE，EL-Lene™ D477C对比LDPE，SABIC® LDPE 2404EC物性表,价格行情_搜料

牌号信息	EL-Lene™ D477C 物性表 LDPE & 泰国暹罗化工指导价格：暂无塑料库存：缺货	SABIC® LDPE 2404EC 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	El-lene D477C是一种用于挤出涂层/层压的高压低密度聚乙烯级产品。 EL-LENE™ D477C is an Autoclave LDPE grade for extrusion coating/lamination.	SABIC® LDPE 2404EC是挤出涂层的管状低密度聚乙烯等级。其特殊的分子结构使其具有良好的加工性能和端部性能。SABIC® LDPE 2404EC可用于低和（非常）高线速挤压涂层和层压工艺。由于其优良的拉伸性能和良好的粘附性，可以在基材上涂上很薄的涂层。应用SABIC LDPE2404EC通常用于挤出涂层和层压应用，如液体包装、成像、食品包装、释放衬垫和建筑U0026amp；结构。可用于纸板、铝箔等基材上的涂布。由于其相对较高的密度（与SABIC LDPE 2005EC相比），因此具有较高的耐温性。性能：在50 m m/min的试验速度下，在压缩成型试样（2 m m厚）上测定机械性能。在实验室规模设备上生产的25μm薄膜上测量薄膜性能。在38°C和90%相对湿度下每24小时的水蒸气渗透性。在23°C和0%相对湿度下每24小时的氧渗透性。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LDPE 2404EC is a tubular LDPE grade for extrusion coating. Its special molecular structure gives a good combination of processing and end-performance properties. SABIC® LDPE 2404EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate. Application SABIC® LDPE2404EC is typically used in extrusion coating and lamination applications, such as liquid packaging, imaging, food packaging, release liners and building u0026amp; construction. It can be used for coatng on paper board, aluminium foil and other substrates. Due its relative high density (compared to SABIC LDPE 2005EC) it has a higher temperature resistance. Properties Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications.

产品描述
厂家：	泰国暹罗化工 SCG	沙特沙伯基础 SABIC
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	涂层应用,铝箔涂料,纸张涂料,层压板	工业应用,Flexible Packaging
性能特点：	机械强度好,可回收,低摩擦系数,内缩量低,食品接触,粘结性好,耐高压加热性 Good Rigidity,Renewable resources,Low coefficient of friction,Low shrinkage,Food contact compliance,Good bond,High pressure heat resistance
加工条件：	挤出涂层