CompaMid® PA 6.6 GF 15
PA66 & 德国DimeLika
Durethan® AKV15H3.0 000000
PA66 & 德国恩骅力
牌号信息 |
PA66 & 德国DimeLika 指导价格:暂无 塑料库存: 缺货 |
PA66 & 德国恩骅力 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
我们的新的可交联复合物PA 6.6是热塑性聚合物,由于β辐射交联,在较宽的温度范围内表现出弹性体的特性。由于交联,最初的热塑性材料能够承受高达400°C的高温,从而在热负荷下提供更大的形状保持力。由于其优异的性能特点,交联复合材料PA 6.6在许多情况下可以取代昂贵的高性能塑料,如PPA、PPS或LCP。从标准PA 6.6切换到复合PA 6.6时,无需更换模具,工艺参数也保持不变。由于其优异的电气和机械性能,交联复合材料PA 6.6化合物非常适合在电气和电子工业中应用。汽车应用由康帕米PA 6.6制成的交联部件用于发动机舱和排气系统,在这些系统中,耐热性和形状保持性以及耐盐、化学品和腐蚀性介质的要求最为苛刻。 Our new crosslinkable CompaMid® PA 6.6 compounds are thermoplastic polymers which behave like elastomers over a wide temperature range as a result of beta radiation cross-linking. Thanks to crosslinking, the originally thermoplastic material can withstand significantly higher temperatures of up to 400°C, thus providing greater shape retention under thermal load. Due to its excellent performance profile, crosslinkable CompaMid® PA 6.6 can replace costly high-performance plastics such as PPA, PPS or LCP in many cases. No mould changes are required when switching from standard PA 6.6 to CompaMid® PA 6.6, and the process parameters also remain the same. Electrical Applications Thanks to their outstanding electrical and mechanical properties, crosslinkable CompaMid ® PA 6.6 compounds are ideally suited for applications in the electrical and electronics industries. Automotive Applications Crosslinked components made of CompaMid ® PA 6.6 are used in the engine bay and exhaust system, where requirements are the toughest for heat resistance and shape retention, as well as resistance to salts, chemicals and corrosive media. |
PA 66,15%玻璃纤维,注塑成型,热老化稳定 Durethan® AKV15H3.0 000000 (Dry) PA 66, 15% glass fibers, injection molding, heat-aging stabilized Durethan® AKV15H3.0 000000 PA 66, 15% glass fibers, injection molding, heat-aging stabilized Durethan® AKV15H3.0 000000 PA 66, 15% glass fibers, injection molding, heat-aging stabilized |
|
产品描述 | |||
厂家: | 德国DimeLika | 德国恩骅力 Envalior | |
类别: | PA66 PA66 | PA66 PA66 | |
填料: | 玻璃纤维 15 | 玻璃纤维 15 | |
用途: | |||
性能特点: | 电气性好,可交联,防火阻燃等级HB Good Electrical Properties,Crosslinked,HB | 热稳定性好 Heat Stabilized | |
加工条件: | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
2 260 °CWZ, 600 Bar
|
3. 60x60x2mm, 4 hr
4. 60x60x2mm, 80°C MT, 600 bar
5. 2.0 mm/min
6. 2 mm/min
7. 10°C/min
|
价格走势对比图
PA66 CompaMid® PA 6.6 GF 15
PA66 Durethan® AKV15H3.0 000000
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交