马来酸酐接枝共聚物，CYCOM® 5250-4对比马来酸酐接枝共聚物，CYCOM® 5250-4 RTM物性表,价格行情_搜料

牌号信息	CYCOM® 5250-4 物性表马来酸酐接枝共聚物 & 美国氰特指导价格：暂无塑料库存：缺货	CYCOM® 5250-4 RTM 物性表马来酸酐接枝共聚物 & 美国氰特指导价格：暂无塑料库存：缺货
牌号简介	CYCOM® 5250-4是一种350°F至400°F（177°C至204°C）固化双马来酰亚胺树脂，使用温度范围为-75°F至400°F（-59°C至204°C）。CYCOM® 5250-4是专门为主要飞机结构设计的。此外，各种二次结构组件可以利用使用高应变碳纤维提高的性能和该系统提供的改进的抗损坏性。CYCOM® 5250-4可与碳纤维或玻璃纤维增强单向带，编织Broadgood和粗纱形式。 CYCOM® 5250-4 is a 350°F to 400°F (177°C to 204°C) curing bismaleimide resin with a service temperature range of -75°F to 400°F (-59°C to 204°C). CYCOM 5250-4 is specifically formulated for use in primary aircraft structures. In addition, a variety of secondary structural components can take advantage of the increased performance from using high-strain carbon fibers and the improved damage- resistance this system provides. CYCOM 5250-4 is available with either carbon fiber or glass fiber reinforcement in unidirectional tape, woven broadgood and roving forms.	CYCOM® 5250-4 RTM是一种真正的单组分均匀的bmi树脂，专门为树脂传递成型（RTM）工艺开发。它在转移过程中达到非常低的粘度，并在数小时内保持较低的粘度，从而提供了制造复杂零件的最大能力。由CYCOM® 5250-4 RTM制造的层压板能够在高达400°F（204°C）的工作温度下使用，但其韧性和可加工性使其成为180°F（82°C）温度下使用环氧树脂的理想材料。CYCOM® 5250-4 RTM提供了任何有机基体树脂的最高裸眼压缩（ohc）值，同时提供了RTM基体树脂的最高韧性。 CYCOM® 5250-4 RTM is a true one-part homogeneous BMI resin developed specifically for the resin transfer molding (RTM) process. IT reaches very low viscosity during transfer and maintains a low viscosity for several hours, thus providing the maximum capability to fabricate complex parts. Laminates fabricated from CYCOM 5250-4 RTM are capable of service temperatures up to 400°F (204°C), but its toughness and processability make it an ideal material for 180°F (82°C) temperature applications where epoxies are commonly used. CYCOM 5250-4 RTM offers the highest open hole compression (OHC) value of any organic matrix resin while providing the highest level of toughness available in an RTM capable matrix resin.

产品描述
厂家：	美国氰特 Cytec Industries	美国氰特 Cytec Industries
类别：	马来酸酐接枝共聚物马来酸酐接枝共聚物	马来酸酐接枝共聚物马来酸酐接枝共聚物
填料：	玻璃纤维/碳纤维
用途：	航空航天应用,粘合剂,构件,增强面板	构件,航空航天应用,增强面板
性能特点：	韧性好,耐高温,抗压性能好,耐化学性 Good flexibility,High Heat Resistance,Good compressive strength,Solvent resistance	易加工,韧性好,低粘度 Excellent Processability,Good flexibility,Low Viscosity
加工条件：		树脂传递成型