TPE，Dryflex® PCW 92A331B对比TPE，Dryflex® PCW 93A331B物性表,价格行情_搜料

牌号信息	Dryflex® PCW 92A331B 物性表 TPE & 英国ELASTO 指导价格：暂无塑料库存：缺货	Dryflex® PCW 93A331B 物性表 TPE & 英国ELASTO 指导价格：暂无塑料库存：缺货
牌号简介	Dryflex® PCW 92A331B：热塑性弹性体基材：TPO硬度：92邵尔A工作温度范围：-50至+75°C（无应力材料）。颜色：黑色表示：自由流动的颗粒，在正常条件下储存时无需预干燥。耐候性：优异的耐臭氧/紫外线性：优异的耐化学性：良好（不包括有机溶剂、芳香族和植物油）回收：100%可回收的模具收缩率（线性）：约0.75-2%取决于例如，门式连接的形状和位置：PP、PE特殊特征：该等级包含约33%的消费后废物（按重量计）。 Dryflex PCW 92A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 92 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 33% by weight of Post Consumer Waste	Dryflex® PCW 93A331B：热塑性弹性体基材：TPO硬度：93邵尔A工作温度范围：-50至+75°C（无应力材料）。颜色：黑色表示：自由流动的颗粒，在正常条件下储存时无需预干燥。耐候性：优异的耐臭氧/紫外线性：优异的耐化学性：良好（不包括有机溶剂、芳香族和植物油）回收：100%可回收的模具收缩率（线性）：约0.75-2%取决于例如，细节的形状和浇口连接的位置：PP、PE Dryflex PCW 93A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 93 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

产品描述
厂家：	英国ELASTO UK ELASTO	英国ELASTO UK ELASTO
类别：	TPE	TPE
填料：
用途：
性能特点：	耐臭氧,可回收,耐候抗UV,耐化学性 Ozone resistance,Renewable resources,Weather resistance is good,Solvent resistance	耐化学性,耐候抗UV,耐臭氧,可回收 Solvent resistance,Weather resistance is good,Ozone resistance,Renewable resources
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding