PEI，Ajedium™ Films -- Polyetherimide对比PEI，Tempalux® Unfilled物性表,价格行情_搜料

牌号信息	Ajedium™ Films -- Polyetherimide 物性表 PEI & 比利时索尔维指导价格：暂无塑料库存：缺货	Tempalux® Unfilled 物性表 PEI & 美国西湖塑料指导价格：暂无塑料库存：缺货
牌号简介	聚醚酰亚胺（PEI）的薄膜是无定形的，适用于高温应用。此外，它们还具有良好的热、机械和电气性能组合，以及极低的可燃性和燃烧过程中的烟雾释放水平。这些特性使PEI特别适合于电气和电子绝缘体。此外，在各种需要高温下高强度和刚度的结构部件中的应用都使用了PEI薄膜。聚醚酰亚胺能抵抗各种化学物质，并具有良好的抗紫外线和γ辐射能力。其玻璃化转变温度允许在高温下使用，同时保持高机械性能。在不同温度、湿度和频率条件下，电性能表现出很好的稳定性。而且，即使在很低的频率下，PEI薄膜也具有较低的耗散系数。 Films of Polyetherimide (PEI) are amorphous and suitable for high termperature applications. Additionally, they have an excellent combination of thermal, mechanical and electrical properties, along with very low flammability and low levels of smoke evolution during combustion. These features make PEI especially well suited for electrical and electronic insulators. Additionally, applications in a variety of structural components requiring high strength and rigidity at elevated temperatures have used PEI films. Polyetherimide resists a wide range of chemicals and has good resistance to UV and gamma radiation. Its glass transition temperature allows for use at high temperatures while maintaining the high mechanical properties. Electrical properties show very good stability under variable temperatures, humidity and frequency conditions. Moreover, PEI films exhibit a low dissipation factor even at very low frequencies. The color of this material is an orange amber.	一种无定形热塑性聚醚酰亚胺，由Ultem树脂制成，具有多种有用特性，包括高温下的高强度、高模量和广泛的耐化学性。tempalux原料形状具有固有的阻燃性和低烟排放。当暴露于多种化学物质时，tempalux原料形状显示出性能保持和抗环境应力开裂的能力。tempalux股票形状的标准颜色是淡琥珀色。玻璃填充等级在颜色上呈棕褐色或绿色。tempalux棒、板和管状棒经过空气退火以消除应力。应用范围包括：老化试验插座连接器汽车部件阀门、电气配件tempalux的优点：固有阻燃性极低，NBS烟度演化优越，极限氧指数优异，拉伸和弯曲强度大，耐紫外线，符合FDA标准。 An amorphous thermoplastic polyetherimide, stock shapes from ULTEM® resin possess a combination of useful characteristics, including high strength at elevated temperatures, high modulus, and broad chemical resistance. Tempalux stock shapes are inherently flame resistant with low smoke emission. Tempalux stock shapes display property retention and resistance to environmental stress cracking when exposed to a wide variety of chemicals. The standard color of Tempalux stock shapes is light amber. Glass filled grades appear tan or greenish in color. Tempalux rod, slab, and tubular bar are air annealed for stress relief. Applications Include: Burn-in test sockets Connectors Automotive components Valves, electrical fittings Advantages of Tempalux: Inherent flame resistance Extremely low NBS smoke evolution Superior limiting oxygen index Exceptional tensile and flexural strength Broad chemical resistance UV stable FDA compliant

产品描述
厂家：	比利时索尔维 Solvay	美国西湖塑料 Westlake Plastics
类别：	PEI Polyetherimide	PEI Polyetherimide
填料：
用途：	汽车领域的应用,工业应用,飞机内饰,石油/天然气用品,电气/电子应用领域	汽车领域的应用,连接器,电气元件,阀门/阀门部件
性能特点：	耐候抗UV,低烟,尺寸稳定性好,电气性好,阻燃,耐高温,耐化学性 Weather resistance is good,Low smoke,Good Dimensional Stability,Good Electrical Properties,Flame Characteristics,High Heat Resistance,Solvent resistance	机械强度好,耐候抗UV,低烟,阻燃,食品接触,拉伸性能好,耐化学性,抗应力开裂,无定形的,防火阻燃等级5VA Good Rigidity,Weather resistance is good,Low smoke,Flame Characteristics,Food contact compliance,Good Tensile Strength,Solvent resistance,High ESCR,Amorphous,5VA
加工条件：

技术参数

物理性能
PHYSICAL Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

机械性能
MECHANICAL Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

压缩强度
compressive strength MPa ASTM D695

压缩模量
Compression modulus MPa ASTM D695

弯曲强度(屈服)
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

撕裂阻力(MD)
Tear resistance cN ASTM D1004

洛氏硬度(M 级)
Rockwell hardness ASTM D785

薄膜
Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

--
-- µm

割线模量(MD)
Secant modulus MPa ASTM D882

割线模量(TD)
Secant modulus MPa ASTM D882

抗撕裂蔓延性(MD)
Tear resistant vine ductility gf ASTM D1922

拉伸应变(MD，屈服)
Tensile strain % ASTM D882

拉伸应变(MD，断裂)
Tensile strain % ASTM D882

拉伸应变(TD，屈服)
Tensile strain % ASTM D882

拉伸应变(TD，断裂)
Tensile strain % ASTM D882

拉伸强度(MD，屈服)
tensile strength MPa ASTM D882

拉伸强度(MD，断裂)
tensile strength MPa ASTM D882

拉伸强度(TD，屈服)
tensile strength MPa ASTM D882

拉伸强度(TD，断裂)
tensile strength MPa ASTM D882

落锤冲击
Drop hammer impact g ASTM D1709B

薄膜厚度(测试)
film thickness

面积系数
Area coefficient ft²/lb/mil

热性能
THERMAL Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

导热系数
Thermal conductivity coefficient W/m/K ASTM C177

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ ASTM D3418

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

电气性能
ELECTRICAL Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm ASTM D149

介电强度(--)
Dielectric strength kV/mm ASTM D149

介电强度(0.03 mm)
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm ASTM D257

耗散因数(1 kHz)
Dissipation factor ASTM D150

阻燃性能
FLAMMABILITY Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

1.90 mm
1.90 mm UL 94

极限氧指数
Extreme oxygen index % ASTM D2863

冲击性能
IMPACT Ajedium™ Films -- Polyetherimide Tempalux® Unfilled 单位
UNIT 测试方法
TEST METHOD

悬臂梁无缺口冲击强度
Notched impact strength of cantilever beam J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
薄膜
热性能
电气性能
阻燃性能
冲击性能
加工方式
备注
返回顶部

PEI，Ajedium™ Films -- Polyetherimide对比PEI，Tempalux® Unfilled对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别