聚烯烃，共挤薄膜用聚烯烃，NP Purge™ Series对比聚烯烃，共挤薄膜用聚烯烃，Technomelt® AS 7875™物性表,价格行情_搜料

牌号信息	NP Purge™ Series 物性表聚烯烃，共挤薄膜用聚烯烃 & 美国Noble Polymers 指导价格：暂无塑料库存：缺货	Technomelt® AS 7875™ 物性表聚烯烃，共挤薄膜用聚烯烃 & 德国汉高指导价格：暂无塑料库存：缺货
牌号简介	NP吹扫是一种基于烯烃的吹扫化合物。NP吹扫适用于各种商品和工程树脂的吹扫。当按建议使用时，颜色和材料转换时间大大减少，消除了吹扫过程中产生的大部分废料。NP清洗是非研磨性的，不使用侵蚀性化学反应来有效地清洗注塑机和挤出机。在建议的浸泡时间之后，NP吹扫反应完成，在被下一种树脂/颜色快速取代之前，它将从加工设备中清除之前的材料。特点：在350°F-600°F之间的温度下有效，无需混合，与金属表面的亲和力低，便于热稳定地置换，可留在桶内，用于关闭树脂基清洗，不含有害化学物质推荐的处理说明：确认桶设定值在350°F-600°F之间填充barrEL带NP吹扫停止注塑机或挤出机螺杆。让NP吹扫在桶中在温度下浸泡5-8分钟，引入下一个待处理的树脂/颜色吹扫系统，直到下一个树脂/颜色取代了之前的树脂/颜色和NP吹扫。 NP Purge™ is an olefin-based purging compound. NP Purge is suitable for purging a wide range of commodity and engineering resins. When used as recommended, color and material change-over times are significantly reduced, eliminating much of the scrap material generated during the purge process. NP Purge is non-abrasive and does not use an aggressive chemical reaction to efficiently purge both injection molding machines and extruders. After the recommended soak time, NP Purge's reaction is complete and it will clean the previous material from the processing equipment before quickly being displaced by the next resin/color. Characteristics: Effective at temperatures between 350° F - 600° F No mixing is required Low affinity to metal surfaces, making it easy to displace Thermally stable, can be left in the barrel for shutdown Resin-based purge with no harmful chemicals Recommended Processing Instructions: Confirm barrel set points between 350° F - 600° F Fill barrel with NP Purge Stop injection molding machine or extruder screw. Let NP Purge soak in the barrel at temperature for 5-8 minutes Introduce next resin/color to be processed Purge system until next resin/color has displaced previous resin/color and NP Purge.	TechnoMelt AS 7875是一种可成型聚烯烃热熔胶，适用于需要防潮和耐溶剂性的应用场合。它对最困难的基底表现出良好的粘附力。 TECHNOMELT® AS 7875™ is a moldable polyolefin hot melt for applications demanding moisture and solvent resistance. It exhibits excellent adhesion to the most difficult substrates.

产品描述
厂家：	美国Noble Polymers	德国汉高 Henkel
类别：	聚烯烃，共挤薄膜用聚烯烃聚烯烃，共挤薄膜用聚烯烃	聚烯烃，共挤薄膜用聚烯烃聚烯烃，共挤薄膜用聚烯烃
填料：
用途：	清洗复合物	粘合,电气/电子应用领域
性能特点：	无腐蚀性,热稳定性好 Non-corrosiveness,Heat Stabilized	粘结性好,防潮,耐化学性 Good bond,Moisture resistance,Solvent resistance
加工条件：	挤出 Extrusion

技术参数

物理性能
PHYSICAL NP Purge™ Series Technomelt® AS 7875™ 单位
UNIT 测试方法
TEST METHOD

吸水率(25℃)
Water absorption rate % ISO 62

机械性能
MECHANICAL NP Purge™ Series Technomelt® AS 7875™ 单位
UNIT 测试方法
TEST METHOD

邵氏硬度(邵氏 A)
Shore hardness ISO 868

热性能
THERMAL NP Purge™ Series Technomelt® AS 7875™ 单位
UNIT 测试方法
TEST METHOD

软化温度
Softening temperature ℃ ASTM E28

Uncured Properties
NP Purge™ Series Technomelt® AS 7875™ 单位
UNIT 测试方法
TEST METHOD

颜色
colour

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
热性能
Uncured Properties
加工方式
备注
返回顶部

聚烯烃，共挤薄膜用聚烯烃，NP Purge™ Series对比聚烯烃，共挤薄膜用聚烯烃，Technomelt® AS 7875™对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别