Bapolene® 2272
LLDPE & 美国Bamberger Polymers
SABIC® LLDPE MG200024
LLDPE & 沙特沙伯基础
牌号信息 |
LLDPE & 美国Bamberger Polymers 指导价格:暂无 塑料库存: 缺货 |
LLDPE & 沙特沙伯基础 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
双烯烃LL2272是一种高流量、窄分子量分布、线性低密度聚乙烯注射树脂。该树脂具有优异的抗应力开裂性、弯曲寿命、低温韧性和低翘曲性。本产品符合FDA食品接触应用标准。 This resin is a high flow, narrow molecular weight distribution, linear low density polyethylene injection resin. This resin offers excellent stress cracking resistance, flex life, low temperature toughness and low warpage. This product meets US FDA 21 CFR 177.1520. |
SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC® LLDPE MG200024为粉末状。应用SABIC® LLDPE MG200024通常用于吹塑、注塑和薄膜挤出应用中碳黑、二氧化钛或颜料含量很高的母粒。由于树脂是以自由流动的粉末形式提供的,因此它可以用于母粒生产,其中使用的是聚乙烯粉末。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC LLDPE MG 200024呈粉末状。SABIC® LLDPE MG200024非常适合于母料应用,如吹塑、注塑和薄膜挤出。特别适用于炭黑、二氧化钛或颜料含量很高的母料。由于树脂是以粉末形式提供的,因此非常适合于使用聚乙烯粉末的母粒生产。本文所述产品尤其未经测试,因此未经验证可用于医药/医疗应用。 SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG200024 is in powder form. Application SABIC® LLDPE MG200024 is typically used for masterbatches with very high carbon black, titanium dioxide or pigment content in blow moulding, injection moulding and film extrusion applications. Since the resin is supplied in free flowing powder form, it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG 200024 is in powder form. SABIC® LLDPE MG200024 is well suited for masterbatch applications like blow moulding, injection moulding and film extrusion. Especially for masterbatches with very high carbon black, titanium dioxide or pigment content. Since the resin is supplied in powder form, it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
|
产品描述 | |||
厂家: | 美国Bamberger Polymers | 沙特沙伯基础 SABIC | |
类别: | LLDPE Linear low density polyethylene | LLDPE Linear low density polyethylene | |
填料: | |||
用途: | 家用货品,容器,外壳,色母料,工业应用,护罩 | 复合,母料 | |
性能特点: | 机械强度好,低翘曲性,流动性高,食品接触,窄分子量分布,丁烯共聚单体,耐低温韧性,抗应力开裂 Good Rigidity,Low warping,High liquidity,Food contact compliance,Weight distribution,Butylene copolymer,Low temperature toughness,High ESCR | 流动性高,窄分子量分布,低密度,共聚物 High liquidity,Weight distribution,Low density,Copolymer | |
加工条件: | 注射成型 Injection Molding | 吹塑成型 |
备注 |
1 一般属性:这些不能被视为规格。
2 2.0 in/min
|
1 一般属性:这些不能被视为规格。
2 压 力1 (10N)
3 速率 A (50°C/h), 压 力1 (10N)
|
价格走势对比图
LLDPE Bapolene® 2272
LLDPE SABIC® LLDPE MG200024
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交